{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01A2100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, 5500 W continuous, three-phase, 205 mm flange, absolute single-turn SinCos Hiperface encoder, IP65, SH32051P01A2100.","salesMarkdown":"## Headline duty — 5.5 kW continuous, voltage-dependent curves The Schneider SH32051P01A2100 is the SH32051P frame in the SH3 series, a three-phase servo motor rated 5500 W continuous power with natural convection cooling and an 8.07 in (205 mm) international-standard flange. ## Drive-loop sizing — current, torque, and electrical constants Continuous stall current is 21 A against a maximum Irms of 87.2 A and a 3-second peak output current of 87.2 A, so the amplifier must deliver well over double the continuous figure to clear acceleration transients without saturating the current loop. ## Feedback, connection, and environmental rating Sealing is IP65 on both the motor body and the shaft bushing per IEC 60034-5, so the unit withstands water-jet washdown typical of food-and-bev lines and outdoor cabinets, provided the mating connector carries equivalent sealing; the 5-pole stator and the absence of a holding brake keep the through-bore free for the encoder-bearing shaft. ## Sourcing posture for the SH32051P01A2100 For tender documentation the verified evidence is the spec set above — 5500 W continuous, three-phase, IP65, Hiperface encoder, 205 mm flange, peak torque 110 N.m — fully compliant with the IEC 60034-5 sealing standard cited on the rating line, with traceability through the SH32051P sizing reference and SH3 device short name.","metaTitle":"SH32051P01A2100 servo motor, 5500 W, Hiperface, 205 mm","metaDescription":"Schneider SH32051P01A2100 SH3 servo motor, 5500 W continuous, 5.5 kW at 400 V three-phase, IP65, Hiperface encoder. Quoted against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32051P01A2100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P01A2100/alternatives.json"},"ai":{"faq":[{"question":"What is SH32051P01A2100's listed phase on this component line?","answer":"Three-phase, per the SH32051P01A2100 spec line; output power and nominal speed scale with the supply, and the 400 V three-phase row delivers the headline 5500 W continuous rating at 3000 rpm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}