{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01A2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, 5.5 kW continuous at 400 V three-phase, 31.9 N·m nominal torque, absolute single-turn SinCos Hiperface encoder, 205 mm international-standard flange, IP65/IP67, part number SH32051P01A2200.","salesMarkdown":"## Servo motor definition and what SH32051P01A2200 actually is Nominal torque follows the same voltage curve and sits between 13.8 N·m at 480 V and 31.9 N·m at 115 V single-phase — the higher low-speed torque at reduced voltage is the constant-torque region of the drive's current loop, useful where the mechanical load is torque-limited at start-up. ## Speed envelope and torque constant Torque constant Kt is 1.6 N·m/A at the 120 °C copper hot point and back-EMF Ke is 104 V/krpm at 20 °C, which together define the current required for a given torque command and the line-to-line voltage needed to hold speed at the field-weakening threshold. Peak stall torque reaches 110 N·m at 115–480 V three-phase, more than three times nominal — the drive's current-foldback profile must be configured to allow those short-duration transients without tripping on I²t, since the continuous stall current is 21 A but maximum Irms is 87.2 A. ## Mechanical fit and shaft loading The motor is built on an 205 mm flange with a 180 mm centring collar 4 mm deep, four 14 mm mounting holes on the standard pattern, and an overall length of 321 mm with a 80 mm shaft stick-out — the cabinet cut-out and machine sub-plate have to be laid out against these dimensions before the cable glands are punched. Shaft load ratings are 740 N maximum axial force and 3730 N radial at 1000 rpm, stepping down to 2960 N at 2000 rpm and 2580 N at 3000 rpm — the higher speed the gearbox or coupling runs at, the less radial load the shaft tolerates, which is the typical constraint when a belt drive or pinion is mounted direct. No holding brake is fitted (option coded out), so a back-up brake on the gearbox or an external shaft brake is required for any vertical-axis application where the load must hold position with the drive powered down. ## Sealing, cooling and connection Sealing is rated IP65 on the motor body, IP65 on the shaft bushing and IP67 on the housing to IEC 60034-5, which is sufficient for washdown-adjacent food-and-bev lines and outdoor skids — the lower shaft-bushing rating is the usual entry point for water-ingress during high-pressure cleaning, so a shaft-seal retrofit is worth considering if the cabinet sees daily hose-down. Cooling is natural convection with no integrated fan, so the motor must be mounted with the airflow path clear and derated if it is enclosed in a sealed cabinet — the 5.5 kW continuous figure assumes free air around the body, not a blanketed back-of-panel mount. The power and feedback signals leave through a rotatable right-angled connector, which lets the cable exit be set to the cabinet side after mounting rather than before — a small thing, but it keeps the cable bend radius in spec when the cabinet layout tightens up.","metaTitle":"SH32051P01A2200 SH3 servo motor, 5.5 kW, Hiperface","metaDescription":"SH32051P01A2200 — Schneider SH3 three-phase servo, 5.5 kW at 400 V, 31.9 N·m nominal, Hiperface SinCos, 205 mm flange. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P01A2200","Length":"12.6 in (321 mm)","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Singleturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/us/en/product/download-pdf/SH32051P01A2200?filename=Schneider+Electric_Lexium-52-Motors_SH32051P01A2200.pdf', 'path_name': 'c3b7a06b9fd3c9896fc68a176fb783a7.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/c3b7a06b9fd3c9896fc68a176fb783a7.pdf', 'status': 1}","sourceUrl":"https://www.se.com/nl/en/product/SH32051P01A2200/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the SH32051P01A2200 phase and supply configuration?","answer":"It is a three-phase servo motor, with the device short name SH3. The published speed/torque envelope covers 115 V single-phase, 230 V single-phase, 400 V three-phase and 480 V three-phase taps, so the same frame can be matched to common industrial mains once the drive's voltage class is selected."},{"question":"What is the SH32051P01A2200 overall length and shaft?","answer":"Overall length is 12.6 in (321 mm) with a 3.1 in (80 mm) shaft stick-out from a 205 mm international-standard flange. The shaft is a smooth 38 mm diameter without a holding brake, sized for direct coupling into a gearbox or pinion."},{"question":"Where can I buy SH32051P01A2200 and how do I get a price?","answer":"Send the RFQ with the voltage tap, encoder option and quantity; pricing and lead time come back with the quote — no stock count or price is shown on this page."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}