{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F1000","rawCanonicalId":null},"summary":{"shortDescription":"Sch Electric SH3 series AC servo motor, device short name SH3, sizing reference SH32051P01, three-phase, 80 N.m holding torque, 5500 W continuous power, absolute single-turn SinCos Hiperface encoder, smooth shaft with brake.","salesMarkdown":"## Where this motor sits in the BOM The SH32051P01F1000 is a three-phase AC servo in the SH3 family with a 205 mm international-standard flange mount and a 14.6 in (370.5 mm) frame length, so it drops into the standard servo footprint used across packaging, converting, and material-handling lines. Holding torque lands at 708.06 lbf.in (80 N.m) with a peak stall ceiling of 973.6 lbf.in (110 N.m), which sets the mechanical envelope a gearbox or direct-drive coupling must respect on the machine side. ## Voltage taps and what the speed/torque envelope actually delivers Nominal speed scales with the drive bus: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — so the same motor spans low-voltage North American cells and 400/480 V three-phase cabinets without a different frame. Nominal output power follows the same ladder, peaking at 5500 W on 400 V three-phase and 5200 W on 480 V three-phase, with 2510 W and 4240 W on the 115 V and 230 V single-phase taps respectively. Nominal torque drops with speed in the expected hyperbolic pattern: 282.3 lbf.in (31.9 N.m) at 115 V single-phase down to 122.1 lbf.in (13.8 N.m) at 480 V three-phase, which is the figure that sizes the continuous working point on the machine, not the holding torque ceiling. Continuous stall torque is 326.6 lbf.in (36.9 N.m) against a 21 A continuous stall current, and the maximum Irms ceiling is 87.2 A — those two numbers together fix the thermal operating window the drive must respect at zero speed. ## Feedback, brake, and electrical interface A holding brake is integrated into the motor — useful for vertical axes where the load must hold position with the drive de-energised — and power is brought out through a straight connector rather than a flying lead. ## Mechanical fit: shaft, flange, and thrust loads The shaft is a smooth 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, matched to a 180 mm centring collar with 0.2 in (4 mm) depth and 14 mm mounting holes on the international standard flange. Maximum mechanical speed is 3800 rpm, so any application pushing the 480 V nominal point of 3600 rpm has only a narrow margin before the mechanical ceiling is reached and bearing life becomes the limiting factor. ## Thermal and electrical constants the drive must respect Cooling is natural convection — no integrated fan — so the continuous torque figures assume a panel that lets the body radiate; an enclosed cabinet or a coupling into a hot gearbox will pull the continuous working point down. Stator resistance is 0.3 Ohm with 8.7 mH inductance, and the back-EMF constant is 104 V/krpm at 20 °C — the drive sizing tool uses these to predict bus ripple current at the target speed. ## Procurement posture and how to specify it Lifecycle status is recorded as current on the SH32051P01F1000, so this is a live BOM position rather than a last-time-buy — volumes are quoted to order against the RFQ with lead time and price confirmed at quote time, and the landed cost picture depends on the HS code and Incoterm rather than the list figure. The order code follows the SH32051P01 sizing reference with the F1000 variant suffix indicating the encoder, brake, and connector combination — match the F-suffix to the drive commissioning file before releasing the PO, because the brake and feedback options are encoded there.","metaTitle":"SH32051P01F1000 servo motor, 80 N.m, 5500 W, 3-phase","metaDescription":"Schneider SH32051P01F1000 AC servo motor, SH3 series, 80 N.m holding torque, 5500 W continuous, Hiperface encoder. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"14.6 in (370.5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/SH32051P01F1000/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F1000/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH32051P01F1000?","answer":"No official L* successor or cross-reference is recorded against the SH32051P01F1000 in this evidence bundle, so any swap to a sibling frame (different stack length, brake option, or encoder variant) is a parametric substitution and not a guaranteed pin-compatible drop-in — confirm the F1000 suffix against the drive commissioning file before changing the order code."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}