{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F1100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32051P01F1100 AC servo motor, 80 N.m holding torque, 5.5 kW continuous, 80 mm shaft, 205 mm flange, IP65, SinCos Hiperface.","salesMarkdown":"## SH3 platform, 205 mm flange, 80 N.m hold The SH32051P01F1100 sits in Schneider Electric's SH3 servo line as a size-205 mm flange machine, built on the SH32051P sizing reference with an international standard flange mounting pattern that drops into the usual 4-hole bolt-up. It is a three-phase unit with five rotor poles and a smooth 38 mm shaft extending 80 mm from the front face, overall body length 370.5 mm. That spread — roughly 2.2× between continuous stall and peak — is the working window a sizing engineer plans against: the 80 N.m hold figure is the clamp force available for vertical-axis static loads, while the 110 N.m peak is what the drive asks for only during acceleration or torque transients. ## Voltage-dependent torque and power envelope Nominal speed and torque both move with the DC bus the drive stacks up. At 400 V three-phase the motor runs 3000 rpm and delivers 17.5 N.m continuous; at 480 V three-phase the speed rises to 3600 rpm and torque drops to 13.8 N.m. Single-phase operation at 115 V is the slowest case at 750 rpm and the highest torque point at 31.9 N.m, with 230 V single phase in between at 1500 rpm / 27 N.m. Continuous power lands at 5500 W — the 400 V three-phase point is the spec where the full power envelope is realised, with 5200 W at 480 V, 4240 W at 230 V single phase, and 2510 W at 115 V single phase. The Irms limit is the number that bounds acceleration torque commands in the drive's current loop; sizing the drive's peak current at or above this figure is what keeps the 110 N.m peak reachable without saturation. ## Sealing, cooling, and panel-side mounting The motor body and the shaft bushing both carry IP65 to IEC 60034-5 — the body seals against hose-directed water and dust, the bushing seal holds at the shaft exit where oil and coolant tend to migrate. Cooling is natural convection only, no integrated fan, which keeps the body length short and the acoustic signature low but means continuous torque must be derated above the rated ambient per the thermal curve. Maximum mechanical speed is 3800 rpm, giving headroom above the 3600 rpm nominal at 480 V. ## Lifecycle status and BOM fit For an OEM buyer, the headline ratings to lock into the BOM are the 5500 W continuous power, 80 N.m holding torque, 38 mm shaft, 205 mm flange, and the SinCos Hiperface encoder — those five numbers define mechanical interchangeability on the driven machine. Build schedules run cleaner when those ratings stay fixed across motor vintages; verify the encoder protocol and brake voltage variant against the existing drive firmware before committing a multi-unit order.","metaTitle":"SH32051P01F1100 Servo Motor, 5.5 kW, 80 N.m, IP65","metaDescription":"Schneider SH32051P01F1100 SH3 servo motor, 5.5 kW continuous, 80 N.m holding torque, SinCos Hiperface encoder, IP65, current production. Quote on RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P01F1100","Length":"14.6 in (370.5 mm)","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/us/en/product/download-pdf/SH32051P01F1100?filename=Schneider+Electric_Lexium-52-Motors_SH32051P01F1100.pdf', 'path_name': 'd8eefd4780b2c798b2d8832f17c0587c.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/d8eefd4780b2c798b2d8832f17c0587c.pdf', 'status': 1}","sourceUrl":"https://www.se.com/nl/en/product/SH32051P01F1100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH32051P01F1100?","answer":"Lead time is not published on the spec record; the RFQ is what locks both against your build date."},{"question":"What is SH32051P01F1100's listed phase on this component line?","answer":"The phase is three-phase with three network phases. Nominal speed is 3000 rpm at 400 V three-phase and 3600 rpm at 480 V three-phase, which is the operating band where the full 5500 W continuous power is realised."},{"question":"What is SH32051P01F1100's listed length on this component line?","answer":"Body length is 370.5 mm / 14.6 in with a 205 mm / 8.07 in flange and a 80 mm / 3.1 in shaft projection. The centring collar is 180 mm in diameter at 4 mm depth, matching the international standard flange print that drops into the standard bolt pattern."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}