{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32051P01F1200 servo motor, 5500 W three-phase, 80 N.m holding torque, 38 mm smooth shaft, IP65 motor with IP67 housing, Hiperface SinCos absolute single-turn encoder, integrated holding brake, international standard flange 205 mm.","salesMarkdown":"## Where the SH32051P01F1200 fits in a drive package Most 5 kW-class machines that look like a candidate for this motor (pumps, conveyors, packaging indexers, and CNC auxiliary axes) need a feedback device that the drive can resolve on power-up without a homing move; the Hiperface SinCos absolute single-turn encoder gives the drive absolute shaft position at standstill, removing the homing routine and the mechanical marker. ## Torque, speed, and what actually decides the fit The same voltage dependence applies to nominal output power — 5500 W at 400 V three-phase versus 5200 W at 480 V three-phase — so a drive running this motor off a 480 V transformer leg actually derates the working torque envelope, it does not extend it. Mechanical speed tops out at 3800 rpm, and the published nominal-speed table lists 750 / 1500 / 3000 / 3600 rpm across the four bus-voltage options; peak stall torque is 110 N.m across the full 115 to 480 V range, roughly 3.4× the continuous stall torque of 36.9 N.m — meaning the motor can punch above its continuous rating for short accel/decel events without saturating, as long as the Irms 87.2 A ceiling and the drive's current limit are respected. Holding torque is 80 N.m and the integrated holding brake is sized to that figure, so a vertical axis can be parked with the brake alone at standstill; the brake is not a dynamic stop mechanism — it is a holding device, and the deceleration energy on an E-stop should be absorbed by the drive resistor or the mechanical system, not the holding brake. ## Mechanical envelope and panel-side mounting Maximum radial load is published as 3730 N at 1000 rpm, 2960 N at 2000 rpm, and 2580 N at 3000 rpm; maximum axial load is 740 N. Those are mid-shaft force ratings — a belt drive with tension outside that envelope will fail the bearings long before the winding does, and the spec curve, not the headline torque, is what a belt-and-pulley sizing should track. Cooling is natural convection — no top-mounted fan, no external blower — so the cabinet needs clear airspace around the housing and the surface treatment cannot be insulated with rubber mounts that block the convective path; the 130 °C copper-hot limit is the thermal ceiling the drive monitors through the encoder temperature channel. ## Sealing, feedback cable, and electrical connection Sealing is graded by section: IP65 on the motor body, IP65 on the shaft bushing, and IP67 on the housing per IEC 60034-5 — so the housing tolerates temporary washdown or wet-area splashes but the shaft seal is the IP65 weak link, and a food-grade washdown or outdoor rooftop mount needs a sealed shaft cover or a stainless-steel splash guard to match the housing's rating. ## Lifecycle and how it ships from the desk Lifecycle stage is listed as current; no official successor or second-source cross-reference is on the record for this order code, so any swap path is parametric rather than manufacturer-validated.","metaTitle":"SH32051P01F1200 servo motor, 5.5 kW, Hiperface, IP65","metaDescription":"SH32051P01F1200 Schneider SH3 servo: 5500 W three-phase, 80 N.m holding, absolute SinCos Hiperface encoder, IP65/IP67, brake. Quoted against your RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"14.6 in (370.5 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.6 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/SH32051P01F1200/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F1200/alternatives.json"},"ai":{"faq":[{"question":"What feedback does the SH32051P01F1200 carry and why does it matter?","answer":"The encoder is an absolute single-turn SinCos Hiperface device — the drive reads absolute shaft position on power-up with no homing move, and the resolver-style SinCos tracks fine position within the turn for the position loop."},{"question":"What is the phase and length rating for the SH32051P01F1200?","answer":"Phase is three-phase, and the motor body length is 14.6 in / 370.5 mm with a 3.1 in / 80 mm shaft stickout — the dimension the gearbox or coupling has to clear during alignment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}