{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor SH32051P01F2000, 80 N.m holding torque, 5500 W continuous power, IP65, Hiperface SinCos absolute encoder, 205 mm flange, with holding brake.","salesMarkdown":"## Torque envelope and what 80 N.m actually buys you The SH32051P01F2000: Torque constant sits at 1.75 N.m/A at the 120 °C copper-hot reference, which is the slope a drive uses to translate commanded current into shaft torque — useful when sizing the drive's continuous current against this motor's torque demand. ## Speed-power scaling across supply rails Continuous output power runs 2510 W at 115 V single-phase, 4240 W at 230 V single-phase, 5500 W at 400 V three-phase, and 5200 W at 480 V three-phase, so the 400 V three-phase rail is the natural target when the application wants full 5.5 kW continuous — falling back to single-phase sacrifices roughly half the available continuous power. Maximum current is 87.2 A rms (same value given for the 3-second peak output current), and stator resistance is 0.3 Ohm with 8.7 mH stator inductance — these are the winding parameters the drive's auto-tuning routine reads at first commissioning. ## Encoder, brake, and what 'with holding brake' changes mechanically Cooling is natural convection with no external fan — there is no auxiliary blower supply to wire, but the continuous torque rating already assumes a free-air mount with adequate clearance on the housing surface for heat rejection. ## Sealing, flange, and shaft-side integration Mounting is an international standard flange at 205 mm (8.07 in) with a 180 mm centring collar (4 mm depth) and 14 mm mounting holes — the flange footprint and centring collar are the geometry a gearbox or machine-base adapter must match. The shaft is a 38 mm (1.5 in) diameter smooth shaft, 80 mm (3.1 in) long, with a rotatable right-angled connector at the electrical side — the connector orientation can be set on assembly to keep the cable exit clear of the adjacent coupling or gearbox housing. Maximum radial load on the shaft is 3730 N at 1000 rpm, 2960 N at 2000 rpm, 2580 N at 3000 rpm; maximum axial load is 740 N — these are the bearing-life limits a belted or geared coupling must respect, with the radial limit dropping as speed rises. Back-EMF constant is 104 V/krpm at 20 °C — this is the figure the drive uses to clamp overvoltage on a deceleration event, and it dictates the minimum bus voltage needed to reach a given no-load speed.","metaTitle":"SH32051P01F2000 SH3 Servo Motor, 80 N.m, 5500 W, IP65","metaDescription":"Schneider SH3 servo motor SH32051P01F2000: 80 N.m holding torque, 5500 W continuous, IP65, Hiperface encoder. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32051P01F2000/servo-motor-sh3-205-369nmnokeysinglebrake90âconn-ip54-ip653-8k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F2000/alternatives.json"},"ai":{"faq":[{"question":"What is SH32051P01F2000's listed phase on this component line?","answer":"The listing states three-phase for SH32051P01F2000, which matches the 400 V / 480 V operating points at 3000 and 3600 rpm nominal speed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}