{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, Lexium SH3 series, three-phase servo motor, SH32051P01F2100, 80 N.m holding torque, 5500 W continuous power, IP65, Hiperface absolute single-turn encoder.","salesMarkdown":"## Where the SH32051P01F2100 sits on a machine It is flange-mounted on the 205 mm international-standard face, with a 38 mm smooth shaft and a centring collar that pulls the motor into alignment on the driven member before the four M-class mounting holes are torqued. The rotatable right-angle connector lets the cable exit be set after the motor is bolted down, which matters when the cabinet layout constrains the harness route. ## Operating envelope across 115-480 V supplies The same winding carries the load across four supply rails, but the available torque and power drop as voltage falls: at 400 V three-phase the motor delivers 5500 W continuous and 17.5 N.m nominal torque; at 480 V the continuous power holds near 5200 W but nominal torque falls to 13.8 N.m; at 230 V single-phase the motor gives 4240 W and 27 N.m; at 115 V single-phase the continuous power is 2510 W with 31.9 N.m nominal. Peak stall torque is 110 N.m across the full 115-480 V range and continuous stall torque is 36.9 N.m, so the dynamic headroom is the same regardless of which supply rail the cabinet feeds. Drive sizing therefore starts from the supply the cabinet actually has, not from the headline 5500 W number, because selecting a 230 V single-phase feed where the application assumes 400 V three-phase base speed will leave the axis short of rpm in the middle of the cycle. ## Feedback, brake, and the mechanical constants the drive needs The feedback device is an absolute single-turn SinCos encoder on the Hiperface protocol, which means the drive can read absolute position on power-up without a homing routine — important on a machine that loses orientation after an E-stop, where a multi-turn encoder would otherwise force a referenced move before production resumes. ## Environment, axial/radial loads, and the panel-side decision Cooling is natural convection with no integrated fan, which keeps acoustic noise low and removes a wear item, but means the cabinet ventilation has to carry the 5500 W dissipation at continuous load. The motor and shaft bushing both carry IP65 to IEC 60034-5 — sealed against low-pressure water jets and dust ingress, which is enough for a machine-tool environment or a washdown-adjacent packaging line, but not for direct food-zone spray-down. The peak current ceiling is 87.2 A — the same figure appears as the 3-second peak output current — which is the number to give the drive-selection engineer so the servo amplifier's peak rating clears the application's acceleration transients. ## Sourcing posture and cross-reference check The part is quoted to order through independent distribution against the BOM line, with availability, lead time, and volume pricing confirmed at RFQ — a posture that fits a maintenance-spare holding where the original-equipment build sheet still names the SH32051P01F2100 specifically and a functional-equivalent swap would require a drive firmware parameter re-load.","metaTitle":"SH32051P01F2100 servo motor, 5.5 kW, 80 N.m, IP65","metaDescription":"Schneider Electric Lexium SH3 servo motor, 80 N.m holding torque, 5500 W continuous, IP65, Hiperface encoder, rotatable connector. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P01F2100","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ie/en/product/download-pdf/SH32051P01F2100?filename=Schneider+Electric_Lexium-52-Motors_SH32051P01F2100.pdf', 'path_name': '44caeff38adf3b225222c4a7efb3724f.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/44caeff38adf3b225222c4a7efb3724f.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ie/en/product/SH32051P01F2100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What supply voltage and nominal speed does the SH32051P01F2100 deliver?","answer":"Continuous power correspondingly runs from 2510 W at 115 V up to 5500 W at 400 V three-phase."},{"question":"Where can I buy the SH32051P01F2100 and how do I get a price?","answer":"No fixed-price, stock-count, or channel-authorization claim is asserted here — the order acknowledgement is what closes the commercial terms for this build."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}