{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series servo motor, SH32051P01F2200, 5.5 kW continuous power, 3000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder, holding brake, smooth shaft, rotatable right-angled connector.","salesMarkdown":"## Motor ratings and voltage-dependent performance The SH32051P01F2200 is a three-phase servo motor from the SH3 series, delivering 5.5 kW continuous power at 400 V three-phase input. Its nominal speed shifts with the supply voltage: 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase. Nominal torque also varies by voltage: 282.3 lbf·in (31.9 N·m) at 115 V single-phase, 239.0 lbf·in (27 N·m) at 230 V single-phase, 154.9 lbf·in (17.5 N·m) at 400 V three-phase, and 122.1 lbf·in (13.8 N·m) at 480 V three-phase. Peak stall torque reaches 973.6 lbf·in (110 N·m) across the 115–480 V three-phase range. ## Encoder, brake, and environmental sealing Fitted with an absolute single-turn SinCos Hiperface encoder, this motor provides position feedback without a homing cycle on power-up — critical for applications that must resume from a known position after a power loss or emergency stop. An integral holding brake delivers 708.06 lbf·in (80 N·m) of holding torque, securing the load when the drive is disabled. The motor carries IP65 protection on the housing and shaft bushing per IEC 60034-5, with IP67 on the housing — suitable for washdown environments in food processing or packaging lines. The rotatable right-angled connector allows the cable exit to be oriented to fit tight cable-tray routing, and the smooth shaft (no keyway) simplifies coupling selection for direct-drive or belt-driven loads.","metaTitle":"SH32051P01F2200 servo motor, 5.5 kW, 3000 rpm, IP65","metaDescription":"SH32051P01F2200 servo motor, 5.5 kW continuous, 3000 rpm at 400 V three-phase, IP65, absolute single-turn SinCos Hiperface encoder, holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P01F2200","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,000.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH32051P01F2200/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}