{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32051P02A1200 three-phase servo motor, 5500 W continuous, 31.9 N.m nominal, 80 mm shaft, IP65 motor, IP67 housing, Hiperface SinCos multiturn encoder.","salesMarkdown":"## What you're actually mating to the drive The SH32051P02A1200 sits in the SH3 sizing reference SH32051P, an 8.07 in (205 mm) flange servo with a smooth 1.5 in (38 mm) shaft and 80 mm of usable shaft length — sized to the international standard flange pattern and centered on a 7.09 in (180 mm) collar with four 0.6 in (14 mm) mounting holes. Production is listed as current on the device short name SH3, so the line is in active manufacture and the BOM position is not at end-of-life risk. ## Drive-side electrical face Stator resistance is 0.3 Ohm with 2.97 mH of stator inductance, and continuous stall current is 21 A against a maximum Irms and 3-second peak output of 87.2 A — the peak is roughly 4× the continuous figure, which is the headroom the drive uses for accel / decel bursts before thermal foldback kicks in. ## Encoder, environment, mechanical envelope Sealing is split by section: IP65 on the motor body, IP65 on the shaft bushing, and IP67 on the housing to IEC 60034-5 — the housing rating is what lets the motor sit close to a washdown nozzle or a coolant splash zone, but the shaft bushing itself only carries IP65 so a direct high-pressure jet aimed at the shaft seal is still the worst case to design around. Cooling is natural convection with no integrated fan, and the thermal ceiling is set at a copper hot spot of 266 °F (130 °C) — derating starts where the cabinet ambient pushes the case above the natural-convection curve on the datasheet, not at the stall current number alone. Shaft load limits: 740 N maximum axial force Fa, and maximum radial force Fr of 3730 N at 1000 rpm falling to 2960 N at 2000 rpm and 2580 N at 3000 rpm — the higher the speed, the lower the side load the bearing will carry, so a belt drive that looks fine at 1500 rpm may be over the Fr line at 3600 rpm.","metaTitle":"SH32051P02A1200 SH3 Servo Motor, 5.5 kW, IP65","metaDescription":"Schneider SH3 SH32051P02A1200 three-phase servo motor, 5.5 kW continuous, 31.9 N.m nominal at 115 V single-phase, IP65 motor / IP67 housing, Hiperface","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P02A1200","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/nl/en/product/SH32051P02A1200/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}