{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32051P02A2000 AC servo motor, three-phase, 5.5 kW continuous at 400 V, 13.8 N·m nominal, IP65, SinCos Hiperface multiturn encoder, smooth shaft, international standard flange.","salesMarkdown":"## Sizing reference and what the 5.5 kW envelope means for the drive The SH32051P02A2000 is the SH32051P sizing reference in the SH3 series — a three-phase AC servo motor carrying 5.5 kW of continuous power at 400 V. Nominal torque scales inversely with operating voltage across the same winding: 31.9 N·m at 115 V single-phase, 27 N·m at 230 V single-phase, 17.5 N·m at 400 V three-phase, and 13.8 N·m at 480 V three-phase — meaning the same mechanical package delivers higher torque at lower line voltage because the nominal speed drops in proportion (3000 rpm at 400 V vs 3600 rpm at 480 V). The peak stall torque of 110 N·m across the 115–480 V envelope gives roughly 8× overload headroom over the 400 V nominal torque of 17.5 N·m, which is the figure that sizes the drive's current loop and mechanical safety margin in cyclic applications. ## Encoder, shaft, and how it drops into the machine Feedback is an absolute multiturn SinCos Hiperface encoder on a rotatable right-angled connector, so position is retained through power cycles without a battery-backed module — the resolver-free SinCos tracks commutation on every power-up. The shaft is a smooth 38 mm diameter × 80 mm length on an international-standard 205 mm flange with a 180 mm centring collar and 14 mm mounting holes, so it mates with the standard NEMA-style or metric servo coupling stack without an adapter plate. Cooling is natural convection only — no integrated fan — so the 5.5 kW continuous figure assumes an open, unblocked mounting that lets the housing radiate to ambient air; an enclosed cabinet derates the motor below the stated continuous rating. The shaft bushing carries IP65 and the motor body carries IP65 to IEC 60034-5, with IP54 at the shaft bushing when no shaft seal ring is fitted — enough for typical industrial washdown but not for direct high-pressure spray zones. ## Stator, rotor, and the load the bearings must take Stator resistance 0.3 Ohm and inductance 8.7 mH, with a torque constant of 1.75 N·m/A at 120 °C winding temperature, define the drive's current-loop bandwidth — the Irms peak of 87.2 A and continuous stall current of 21 A set the boundary the servo amplifier must deliver. Radial load capacity on the shaft falls with speed: 3730 N at 1000 rpm, 2960 N at 2000 rpm, and 2580 N at 3000 rpm — meaning a belt or pinion drive running near the top of the speed range has roughly 30 % less allowable side load than the same drive at low speed, with a maximum axial load of 740 N on top.","metaTitle":"SH32051P02A2000 Servo Motor, 5.5 kW, 400 V three-phase","metaDescription":"Schneider Electric SH32051P02A2000 SH3 servo motor, 5.5 kW continuous, 400 V three-phase, IP65. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/SH32051P02A2000/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P02A2000/alternatives.json"},"ai":{"faq":[{"question":"What is SH32051P02A2000's listed phase?","answer":"SH32051P02A2000 is listed as three phase, with the winding envelope spanning 115 V single-phase up to 480 V three-phase at nominal speeds of 750–3600 rpm."},{"question":"What is SH32051P02A2000's listed length?","answer":"The motor body length is 12.6 in (321 mm), with an 80 mm shaft extension on the 205 mm international-standard flange."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}