{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series AC servo motor, three-phase, 5.5 kW continuous, 205 mm flange, IP65, Hiperface SinCos absolute multiturn encoder.","salesMarkdown":"## What the SH32051P02A2100 actually is The Schneider SH32051P02A2100 is a three-phase AC servo motor from the SH3 sizing family, built around a 205 mm international-standard flange and measuring 321 mm long with a 38 mm smooth shaft that protrudes 80 mm out of the housing. ## Power and torque envelope across the three voltage classes Continuous output power sits at 5500 W on 400 V three phase and 5200 W on 480 V three phase, but the same frame only delivers 2510 W on 115 V single phase and 4240 W on 230 V single phase — the motor is sized for a 400 V three-phase feed, with the lower voltages listed as derated operating points, not headline ratings. Nominal torque follows the same shape: 31.9 N.m at 115 V single phase, 27 N.m at 230 V single phase, 17.5 N.m at 400 V three phase, and 13.8 N.m at 480 V three phase, paired against nominal speeds from 750 rpm at the lowest voltage class up to 3600 rpm on 480 V three phase. Selecting the frame for the application means matching the torque-at-speed point to the mechanical duty, not the headline power number. ## Mechanical fit and on-machine load limits Shaft loading is bounded at 3730 N radial at 1000 rpm, dropping to 2960 N at 2000 rpm and 2580 N at 3000 rpm, with a maximum axial force of 740 N — direct-coupled loads are well inside the envelope, but a belt or pinion drive has to be checked against the radial curve at the actual operating speed before sign-off. ## Encoder feedback and electrical interface The Hiperface SinCos absolute multiturn encoder resolves position via one-cycle SinCos analog tracks plus a digital protocol channel, so the drive end needs to support Hiperface — pairing the SH32051P02A2100 against a drive that only takes incremental encoders means the multi-turn retention is lost and a homing routine has to be added on every power-up. Electrical termination is a rotatable right-angled connector, which lets the installer orient the cable exit after the motor is bolted down — a small but useful detail on cramped machine layouts where the cable drop direction is fixed by the harness, not the motor. ## Environment, cooling, and what the frame is rated to take Cooling is natural convection with no integrated fan, which keeps the acoustic signature low and removes a maintenance item — but the continuous torque has to be derated in any enclosure where the ambient around the motor body rises above the reference figure.","metaTitle":"SH32051P02A2100 servo motor, 5500 W, IP65","metaDescription":"Schneider SH3 AC servo motor, 5.5 kW continuous, 205 mm flange, IP65, absolute multiturn Hiperface. Sourced and quoted to order against the RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P02A2100","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/be/en/product/SH32051P02A2100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"Where can I buy SH32051P02A2100 and how do I get a price?","answer":"Submit an RFQ with the required quantity and the target voltage class (the part is rated across 115 V single phase, 230 V single phase, 400 V three phase, and 480 V three phase); pricing and lead time are confirmed at quote time against the BOM line."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}