{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32051P02A2200 servo motor, three-phase, 5.5 kW continuous power, 3000 rpm nominal speed at 400 V, IP65/IP67, absolute multiturn SinCos Hiperface encoder, smooth shaft, 1.5 in shaft diameter.","salesMarkdown":"## 5.5 kW servo with voltage-dependent speed and torque The SH32051P02A2200 is a three-phase servo motor rated for 5.5 kW continuous output power at 400 V three-phase supply, but it also runs on single-phase inputs at reduced ratings — 2510 W at 115 V single phase and 4240 W at 230 V single phase. Nominal speed shifts with the supply voltage: 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase. Torque follows the same pattern — 282.3 lbf.in (31.9 N.m) at 115 V dropping to 122.1 lbf.in (13.8 N.m) at 480 V. The motor uses a smooth shaft (no keyway) with a 1.5 in (38 mm) diameter and 3.1 in (80 mm) shaft length, so the coupling or pulley must use a clamping or friction-fit method — no keyseat to transmit torque. ## Absolute Hiperface encoder for position-critical axes The built-in absolute multiturn SinCos Hiperface encoder gives you high-resolution position feedback without needing a home cycle on power-up — the drive reads the absolute position from the encoder's multiturn count. This matters for applications like gantry axes or rotary tables where losing position on a power cycle means a re-reference move that costs cycle time. The encoder type is specified as 'Absolute multiturn SinCos Hiperface' — that's a standard industrial protocol, so it pairs with most servo drives that support Hiperface (Siemens S120, Bosch Rexroth IndraDrive, Kollmorgen AKD, etc.). Confirm the drive's encoder interface supports SinCos Hiperface before wiring. Electrical connection uses a rotatable right-angled connector — gives you some flexibility in cable routing inside the cabinet or cable track, but the connector orientation must be set before final tightening. ## IP65/IP67 sealing and natural convection cooling The motor body and shaft bushing meet IP65 per IEC 60034-5, and the housing meets IP67 — so the motor withstands washdown with low-pressure jets and temporary immersion. That makes it a fit for food-and-beverage packaging lines or machining centers where coolant spray is constant. Cooling is by natural convection — no external fan or forced air. That means the motor relies on its own surface area and the surrounding airflow to shed heat. In a confined cabinet or high-ambient environment, you'll need to check the thermal duty cycle against the continuous stall torque rating of 326.6 lbf.in (36.9 N.m).","metaTitle":"SH32051P02A2200 servo motor, 5.5 kW, 3000 rpm, IP65","metaDescription":"SH32051P02A2200 servo motor, 5.5 kW continuous, 3000 rpm at 400 V three-phase, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P02A2200","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,860.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH32051P02A2200/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}