{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02F1100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02F1100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32051P02F1100 three-phase servo motor, 205 mm flange, 80 N.m holding torque, 5.5 kW continuous at 400 V three-phase, Hiperface encoder, IP65.","salesMarkdown":"## 80 N.m holding torque in a 205 mm flange package The SH32051P02F1100: The Schneider Electric SH3 205 mm-frame servo motor carries a continuous stall torque of 36.9 N.m at the 115–480 V three-phase supply range and peaks at 110 N.m in stall — about 3× the continuous figure — so any sizing exercise must check whether the application's worst-case acceleration pulse sits inside that 3 s peak envelope before trusting the continuous rating. Holding torque with the integral parking brake engaged is 80 N.m, which means the locked-rotor figure (the brake's job) exceeds the continuous stall of the bare motor — the brake is sized to hold the rotor at zero speed with the full servo torque still available downstream of the coupling. ## 5.5 kW continuous at 400 V three-phase, derated by supply rail Continuous output power is 5500 W at 400 V three-phase, dropping to 5200 W at 480 V three-phase, 4240 W at 230 V single-phase, and 2510 W at 115 V single-phase — the 480 V figure falling below the 400 V figure is the field-weakening region beginning to bite, not a data quirk, and matters when the drive is fed from a 460 V US supply rather than a 400 V European one. Peak current capability is 87.2 A rms and the 3-second peak output current is also 87.2 A, so the peak and continuous stator current ceilings align for this winding — the 3 s figure is a thermal ceiling, not an electrical one higher than the inverter can deliver. ## Hiperface SinCos absolute multiturn feedback and motor constants Feedback is an absolute multiturn SinCos encoder on the Hiperface protocol — single-cable digital feedback plus the resolver-style SinCos tracks, so position is retained across power cycles and the drive electronics can resolve commutation angle directly from the encoder without a Hall sensor bootstrap. Back-EMF constant is 104 V/krpm at 20 °C, and torque constant is 1.75 N.m/A — those two figures have to be matched against the drive's bus voltage and current loop to deliver the rated speed without saturating the field-weakening region or starving the torque loop of current. ## IP65 housing, 205 mm flange, 14.6 in stack length The flange is 205 mm with a centring collar of 180 mm diameter and 4 mm depth, mounting holes of 14 mm diameter on the international standard flange pattern, shaft diameter 38 mm, shaft length 80 mm — this is the SH3 family mounting geometry, so any machine redesign that drops a different SH3 frame in its place is a bolt-and-coupler swap rather than a re-machined bracket. ## Lifecycle and sourcing pathway Electrical connection is a straight connector or a rotatable right-angled connector on the same motor body, so the cable entry direction is selectable at install time without re-ordering a different motor variant — useful when the panel layout forces the lead-out in one direction.","metaTitle":"SH32051P02F1100 SH3 Servo Motor, 80 N.m Holding, 5.5 kW","metaDescription":"SH32051P02F1100 SH3 servo motor, 205 mm flange, 80 N.m holding brake, 5.5 kW continuous at 400 V three-phase, Hiperface encoder. Quoted against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P02F1100","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32051P02F1100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What supply rail and power level does SH32051P02F1100 deliver at its rated point?","answer":"The continuous output power is 5500 W at 400 V three-phase at a nominal speed of 3000 rpm, with the motor also rated for 5200 W at 480 V three-phase, 4240 W at 230 V single-phase, and 2510 W at 115 V single-phase — the 400 V three-phase point is the headline rating and the right one to base the drive sizing on for European-supply panels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}