{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, 5500 W continuous, three-phase, 80 N·m holding torque, 38 mm smooth shaft, Hiperface SinCos absolute multiturn encoder, IP65, international standard flange.","salesMarkdown":"## Five-and-a-half kW, three-phase, one flange The SH32051P02F2100 is a member of the SH3 servo family — a three-phase AC servo motor sized to deliver 5500 W of continuous mechanical output at the 400 V three-phase operating point, with a 80 N·m holding torque and a 14.6 in (370.5 mm) frame length. Sizing reference SH32051P02F2100 points to the long-stack variant of the SH3 line, so the unit fills the high-torque slot in this motor series rather than the compact end. Continuous power and nominal torque shift with the supply. The motor is rated 2510 W at 115 V single phase, 4240 W at 230 V single phase, 5500 W at 400 V three phase and 5200 W at 480 V three phase, with nominal torque scaling from 31.9 N·m at 115 V down to 13.8 N·m at 480 V — the three-phase 400 V point is where both torque and power reach their listed maxima, which is the configuration a drive commissioning engineer should plan around. ## Hiperface SinCos feedback and torque constant The torque constant of 1.75 N.m/A at 248 °F (120 °C) winding temperature and the back-EMF constant of 104 V/krpm at 68 °F (20 °C) are the two figures that the drive current loop and the speed-loop gain calculation both need: the drive firmware reads the EMF constant to scale the velocity observer, and the torque constant converts commanded current into shaft torque. The gap between continuous and peak — roughly a 3:1 overload envelope — is the working headroom an integrator sizes acceleration and deceleration ramps against. ## Mechanical envelope — 205 mm flange, 38 mm shaft The motor flange is 8.07 in (205 mm) with a 7.09 in (180 mm) centring collar 0.2 in (4 mm) deep, drilled on 14 mm mounting holes — the international standard flange pattern that drops onto a standard gearhead or right-angle reducer. The smooth shaft is 1.5 in (38 mm) in diameter and 3.1 in (80 mm) long, which dictates the bore of the mating coupling or pinion. Load limits on the shaft side: 740 N maximum axial force Fa, and maximum radial force Fr that drops from 3730 N at 1000 rpm to 2580 N at 3000 rpm — the radial figure is the one that gates a belt-drive or pinion mounting, because the bending load on the shaft nose rises with the overhung load and falls as the pulley moves closer to the shaft shoulder. ## Brake, inertia and thermal envelope Cooling is natural convection — no external fan, so the motor dissipates heat through the housing surface. The copper hot-spot ceiling is 266 °F (130 °C), and the IP65 rating on both the motor body and the shaft bushing to IEC 60034-5 means the unit is sealed against water jets and dust, which qualifies it for washdown-area machinery and outdoor skids where forced-air cooling is not available. ## Lifecycle read on the SH3 line With no L* successor or P* sibling in the ledger, there is no official cross-reference to a replacement; the existing SH3 platform remains the supported fit. Electrical connection is a straight connector as standard, with a rotatable right-angled connector as the alternate — the rotatable option is the one to spec on a tight-cabinet machine where the cable has to leave the motor in a controlled direction rather than straight out of the back. The unit ships one per package.","metaTitle":"SH32051P02F2100 Servo Motor, 5.5 kW, Hiperface, IP65","metaDescription":"SH32051P02F2100 — 5500 W AC servo motor, three-phase, 80 N·m holding torque, Hiperface SinCos encoder, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P02F2100","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 1 stack, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32051P02F2100/sh3-servomotor-205mm-1-stack-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the phase and continuous power of SH32051P02F2100?","answer":"Three-phase supply, 5500 W continuous at the 400 V three-phase operating point, with 4240 W at 230 V single phase, 2510 W at 115 V single phase and 5200 W at 480 V three phase as the alternative points on the rating plate."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}