{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH32051P02F2200, 80 N.m holding torque, 5500 W continuous, three-phase, absolute multiturn SinCos Hiperface encoder, IP65, international standard flange mount.","salesMarkdown":"## Does the SH32051P02F2200 still answer a current-production servo brief? Holding torque lands at 708.06 lbf.in (80 N.m), with peak stall torque rated 973.6 lbf.in (110 N.m) across 115–480 V three-phase operation, so the motor covers both a sustained working envelope and short-duration overload without stepping to a larger frame. ## Where the continuous and nominal torque windows actually pin the fit Continuous power is 5500 W at 400 V three phase, dropping to 5200 W at 480 V three phase, 4240 W at 230 V single phase, and 2510 W at 115 V single phase, with nominal torque scaling the same way from 154.9 lbf.in (17.5 N.m) at 400 V three phase down to 122.1 lbf.in (13.8 N.m) at 480 V three phase. Continuous stall torque is 326.6 lbf.in (36.9 N.m) across 115–480 V three phase, so the servo holds rated torque at zero speed without exceeding the 266 °F (130 °C) winding temperature limit when the drive current loop is set per the SH3 tuning profile. Maximum current (Irms) is 87.2 A and the 3-second peak output current is also 87.2 A, indicating the drive loop ceiling — the motor is matched to a Lexium or equivalent servo drive whose continuous and peak current envelope aligns with this figure rather than a higher-rated module. ## Encoder feedback and shaft geometry a designer has to match Mounting follows the international standard flange with an 8.07 in (205 mm) motor flange and a 7.09 in (180 mm) centring collar at 0.2 in (4 mm) depth, and the four mounting holes are 0.6 in (14 mm) diameter, giving a bolt circle the panel builder can drill without a custom fixture plate. ## Shaft loading, rotor inertia, and the duty class this motor actually serves Maximum radial force Fr is 3730 N at 1000 rpm, 2960 N at 2000 rpm, and 2580 N at 3000 rpm, with maximum axial force Fa of 740 N, so a belt or gear drive must be positioned within the radial-load envelope of the speed range — exceeding Fr at low rpm is the usual failure path on high-inertia servos. ## Thermal envelope, sealing, and where the motor physically sits Cooling is natural convection with no integrated fan, so the motor must be mounted with the housing clearances the SH3 manual calls out and not packed into an enclosed cabinet where the 266 °F (130 °C) winding limit can be approached under continuous stall. ## Electrical constants the drive commissioning engineer needs Stator resistance is 0.3 Ohm with 8.7 mH stator inductance, a torque constant of 1.75 N.m/A at 248 °F (120 °C), and a back-EMF constant of 104 V/krpm at 68 °F (20 °C) — these are the loop-tuning inputs the drive auto-identification routine uses on first commissioning. Nominal speed steps through 750 rpm at 115 V single phase, 1500 rpm at 230 V single phase, 3000 rpm at 400 V three phase, and 3600 rpm at 480 V three phase, so the drive voltage class — not just the power class — selects which speed point the application runs at. The motor has 5 poles and uses a rotatable right-angled connector for the power and feedback cable, which means the cabinet-side cable entry can be rotated to match the gland plate orientation without re-terminating the connector.","metaTitle":"SH32051P02F2200 SH3 Servo Motor, 80 N.m, 5500 W, IP65","metaDescription":"Schneider SH32051P02F2200 SH3 servo motor, 80 N.m holding torque, 5.5 kW continuous, Hiperface encoder, IP65, flange mount. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"8.7 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32051P02F2200/servo-motor-sh3-205-369nmnokeymultibrake90âconn-ip65-ip673-8k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32051P02F2200/alternatives.json"},"ai":{"faq":[{"question":"What is the SH32051P02F2200's listed phase?","answer":"The SH32051P02F2200 is listed as three phase, with operating envelopes specified at 115 V single phase, 230 V single phase, 400 V three phase, and 480 V three phase across the nominal speed and torque tables."},{"question":"What is the SH32051P02F2200's listed length?","answer":"The SH32051P02F2200 measures 14.6 in (370.5 mm) end-to-end, with an 8.07 in (205 mm) flange, a 7.09 in (180 mm) centring collar, and a 3.1 in (80 mm) shaft projecting from the front face."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}