{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P11A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P11A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P11A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P11A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor SH32051P11A1200, three-phase, 5500 W continuous, 8.07 in (205 mm) flange, IP65/IP67, single-turn SinCos Hiperface encoder.","salesMarkdown":"## Form factor and shaft interface The SH32051P11A1200: Four 0.6 in (14 mm) mounting holes take the panel-side fasteners. The output shaft is 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, with a 0.4 in (10 mm) parallel key — sized for a typical gear or coupling coupling in the 5 kW class. The continuous radial load budget is 3730 N at 1000 rpm tapering to 2580 N at 3000 rpm, with a 740 N axial ceiling; coupling selection should sit comfortably inside that envelope rather than at the limit. ## Speed, torque and power envelope Nominal torque follows the inverse pattern, 31.9 N.m at 115 V single-phase dropping to 13.8 N.m at 480 V three-phase. Winding electricals are 0.3 Ohm stator resistance with 2.97 mH inductance — meaningful for the drive's current-loop bandwidth tuning rather than the panel-side wiring. Cooling is natural convection with a 130 °C copper-hot thermal envelope, so no external fan or ducted airflow is required to hold the continuous rating. ## Feedback, sealing and connection Connection is a straight connector on the housing, sized to the SH3 family wiring harness. Sealing to IEC 60034-5 is IP65 at the motor body, IP65 at the shaft bushing, and IP67 at the housing — washdown and outdoor cabinet duty are within the rating envelope when the cable gland and shaft seal are correctly seated. The shaft bushing entry is the wet barrier that drives the IP65 line, so a damaged or unseated seal drops the rating even though the housing itself stays at IP67. ## Lifecycle read and the RFQ posture There is no official successor or second-source cross-reference on the ledger — replacement decisions have to be made within the SH3 family footprint, not by swapping to a different series. Independent distribution quotes this code against the BOM at the requested quantity; availability, lead time, and any volume break are confirmed at RFQ rather than carried as a standing stock claim. For a single spare or a panel builder covering a five-machine line, the same quote-to-order posture applies — pricing is current-bid, not a published list.","metaTitle":"SH32051P11A1200 servo motor, 5.5 kW, three-phase, IP65","metaDescription":"Schneider SH32051P11A1200 SH3 servo motor: 5500 W continuous, three-phase, IP65/IP67, 205 mm flange. Sourcing posture confirmed at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P11A1200","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32051P11A1200/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What phase and continuous power is SH32051P11A1200 rated for?","answer":"SH32051P11A1200 is a three-phase servo motor with a continuous power rating of 5500 W at 400 V three-phase, the strongest of its voltage ladder. At 230 V single-phase it drops to 4240 W, and at 480 V three-phase it is 5200 W — a single frame covering both single-phase and three-phase machine builders."},{"question":"What is the shaft and flange specification on SH32051P11A1200?","answer":"Centring collar is 7.09 in (180 mm) diameter set 0.2 in (4 mm) deep, and the overall length is 12.6 in (321 mm)."},{"question":"What IP rating does SH32051P11A1200 carry, and where can it be deployed?","answer":"The shaft bushing seal is the wet-end barrier; the housing IP67 alone is not the figure to specify against."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P11A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P11A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}