{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P11A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P11A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P11A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P11A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32051P11A2200 three-phase servo motor, 5-pole, 5500 W at 400 V, 87.2 A continuous, IP65 motor/IP67 housing, 205 mm flange, rotatable right-angled connector, natural convection cooling.","salesMarkdown":"## Motor dimensions and mounting — 12.6 in length, 205 mm flange The SH32051P11A2200: Overall body length is 12.6 inches (321 mm) from the mounting face to the back of the housing — measure your panel depth before ordering. The motor flange measures 8.07 inches (205 mm) across, with a centring collar diameter of 7.09 inches (180 mm) that locates into the mating bore. Four mounting holes on a 0.6-inch (14 mm) diameter bolt circle hold it to the machine frame. Shaft diameter is 1.5 inches (38 mm) with a parallel keyway, key width 0.4 inch (10 mm), and shaft length 3.1 inches (80 mm). The centring collar depth is 0.2 inch (4 mm) — that shallow pilot means the motor face sits nearly flush against the mounting plate. ## Power and torque across supply voltages This 5-pole servo motor delivers different output depending on what voltage you feed it. On 400 V three-phase, nominal output is 5500 W continuous at 3000 rpm with 154.9 lbf·in (17.5 N·m) of torque. Bump it to 480 V three-phase and speed climbs to 3600 rpm but torque drops to 122.1 lbf·in (13.8 N·m), giving 5200 W. On single-phase 230 V, you get 4240 W at 1500 rpm with 239.0 lbf·in (27 N·m). The peak stall torque is 973.6 lbf·in (110 N·m) across the 115–480 V three-phase range — that's the short-duration muscle for acceleration. Continuous stall torque sits at 326.6 lbf·in (36.9 N·m) for three-phase supplies. The torque constant is 1.75 N·m/A at 248 °F (120 °C) copper temperature — that's the hot winding condition, not the cold-start number. Back EMF constant is 104 V/krpm at 68 °F (20 °C). Stator resistance is 0.3 ohm and inductance is 2.97 mH, which your drive's current loop tuning needs to handle. ## Sealing and cooling — IP65/IP67, natural convection The motor body carries IP65 per IEC 60034-5 on the motor and shaft bushing, with IP67 on the housing — meaning it handles washdown spray and temporary immersion. No fan on this one: cooling is natural convection, so the motor relies on the machine frame or ambient air movement to shed heat. The maximum copper temperature is 266 °F (130 °C), so if you're running it hard in a hot cabinet, derate the continuous torque or add forced airflow. The electrical connection is a rotatable right-angled connector — you can orient the cable exit in 90° increments to fit tight cable trays or panel entries. No holding brake fitted, so if you're mounting this on a vertical axis, plan for an external brake or a drive with a holding function. ## Bearing loads and encoder feedback Feedback comes from an absolute single-turn SinCos Hiperface encoder — gives position at power-up without a homing cycle, and the sine-cosine signals provide high-resolution interpolation for the drive. Single-turn means it tracks position within one revolution; if your application needs multi-turn absolute position over several shaft rotations, this encoder won't cover it without a battery-backed multi-turn unit.","metaTitle":"SH32051P11A2200 5.5 kW servo motor, 87.2 A, IP65/67","metaDescription":"SH32051P11A2200 three-phase servo motor, 5500 W at 400 V, 87.2 A continuous, IP65/IP67 sealed, 205 mm flange, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P11A2200","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Singleturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,500.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32051P11A2200/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the maximum continuous current for SH32051P11A2200?","answer":"The motor is rated for 87.2 A continuous (Irms maximum). The 3-second peak output current is also listed at 87.2 A — verify with the drive manufacturer whether the peak rating is accurate or a datasheet carryover."},{"question":"Does this motor come with a holding brake?","answer":"No holding brake is fitted — the spec lists 'Without' under holding brake. For vertical-axis applications or any load that needs to hold position when power is removed, you'll need an external brake or a drive with a brake control output."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P11A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P11A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}