{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider SH3 SH32051P11F1200 AC servo motor, three-phase, 5500 W continuous, 80 N.m holding, 31.9 N.m nominal at 115 V single-phase, SinCos Hiperface absolute encoder, IP65/IP67, 205 mm flange.","salesMarkdown":"## SH3 servo platform, 205 mm flange, three-phase brushless The SH32051P11F1200: Shaft-end is a parallel key rather than a smooth or plain cylindrical end, so the coupling or pinion has to be keyed to match. ## 5.5 kW continuous, 80 N.m hold, 110 N.m peak stall Continuous output is 5500 W on 400 V three-phase and 5200 W on 480 V three-phase — the 400 V point is the headline rating, not the 480 V figure, which is where the part sits in EU-panel installations. Nominal torque follows the same pattern: 31.9 N.m at 115 V single-phase, 27 N.m at 230 V single-phase, 17.5 N.m at 400 V three-phase, 13.8 N.m at 480 V three-phase. Holding torque is 80 N.m — the spec that sizes the holding-brake derate, since the parking brake has to back-EMF the rotor against this figure on a power-loss drop. Maximum current is 87.2 A Irms and 87.2 A as the 3-second peak output current, with a torque constant of 1.75 N.m/A at 248 °F (120 °C) winding temperature — meaning the motor's actual N.m-per-amp is measured at the hot copper limit (266 °F / 130 °C), not at room temperature, so a cold-start motion profile will read more N.m/A than the rated figure until the windings warm. ## IP65 motor face, IP67 housing, natural convection Cooling is natural convection only — no integrated fan — so the continuous ratings above assume the motor is mounted with the air path the flange implies; a sealed enclosure without a heat sink will pull the duty envelope down. Mechanical load limits are 740 N maximum axial force Fa, and 3730 N radial at 1000 rpm, dropping to 2960 N at 2000 rpm and 2580 N at 3000 rpm — so the radial-load envelope falls roughly 30 % from 1000 rpm to 3000 rpm, which is the figure a belt or pinion drive must check across its operating speed, not at the rated speed alone. The part ships as a single unit per package with no integral gearbox or option card; the matching drive, cables, and connector kit are specified separately on the BOM.","metaTitle":"SH32051P11F1200 Servo Motor, 5500 W, 80 N.m, IP65","metaDescription":"Schneider SH3 SH32051P11F1200 AC servo motor, 5.5 kW continuous, 80 N.m holding, SinCos Hiperface encoder, IP65/IP67, three-phase. Quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P11F1200","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/nl/en/product/SH32051P11F1200/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH32051P11F1200?","answer":"The same SH3 205 mm flange platform can be scaled within the family for different continuous-power and torque ratings, but a direct pin-compatible replacement requires the original manufacturer to confirm the match — not assumed by part-number family proximity."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}