{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, three-phase, 80 N·m holding torque, 5500 W continuous power, 205 mm flange, absolute SinCos Hiperface encoder, holding brake, IP65.","salesMarkdown":"## Will it hold the load through a controlled stop? SH32051P11F2000 sits in the SH3 sizing family as reference SH32051P — a 205 mm international-standard flange servo motor with parallel-key shaft, holding brake, and absolute single-turn SinCos Hiperface feedback (cite:,). ## Torque envelope vs. the motion profile Holding torque is 708.06 lbf·in (80 N·m); peak stall torque reaches 973.6 lbf·in (110 N·m) and continuous stall torque is 326.6 lbf·in (36.9 N·m) across the 115 to 480 V range — meaning the peak figure is the ceiling for short acceleration transients, not the duty rating (cite:,). Maximum current is 87.2 A Irms with the same 87.2 A 3-second peak output current, and the torque constant is 1.75 N·m/A at 248 °F (120 °C) — the drive current loop must reach that Irms ceiling if the application is to use the published peak torque (cite:,). Back-EMF constant 104 V/krpm at 68 °F (20 °C), stator resistance 0.3 Ohm and stator inductance 2.97 mH — values the drive commissioning engineer feeds into the auto-tuning step, not a panel-side concern (cite:,). ## Mechanical loop and shaft loading Shaft diameter is 1.5 in (38 mm) with a 3.1 in (80 mm) shaft length and 0.4 in (10 mm) parallel key — the same mechanical envelope as the rest of the SH32051 sizing group, so existing couplings and gear mounts in a rebuild stay drop-in (cite:,). Maximum axial force Fa is 740 N; radial load Fr is 3730 N at 1000 rpm stepping down to 2580 N at 3000 rpm — the radial limit, not the motor's continuous torque, is what fails first on a belted or geared drive (cite:,). ## Sealing, mounting and the cabinet side Protection rating is IP54 at the shaft bushing without shaft seal and IP65 on the motor body and shaft bushing with seal per IEC 60034-5 — meaning the motor survives a washdown environment when the seal option is fitted (cite:). Cooling is natural convection, mounting holes are 0.6 in (14 mm) on the 8.07 in (205 mm) international-standard flange, with a 0.2 in (4 mm) centring collar — fit is to standard IEC flange geometry rather than a manufacturer-specific footprint (cite:,). Electrical connection is a straight connector with a rotatable right-angled alternative, and copper hot temperature is rated 266 °F (130 °C) — the connector orientation is the only panel-side decision that varies between otherwise identical builds (cite:,). ## Lifecycle and the RFQ posture Sizing reference SH32051P keeps the part identifiable inside the broader SH3 catalogue, so a rebuild or a field replacement can be specified by frame, stack length and encoder type rather than by guessing at a drop-in substitute that the manufacturer does not list (cite:).","metaTitle":"SH32051P11F2000 SH3 servo motor, 80 N·m, 400 V 3-phase","metaDescription":"SH32051P11F2000 SH3 servo motor, three-phase, 80 N·m holding torque, 5500 W continuous, IP65. Sourced to order against an RFQ; quote returned with lead time.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P11F2000","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32051P11F2000/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"Where can I buy SH32051P11F2000 and how do I get a price?","answer":"No stocking claim is made — every order is quoted against the specific build (straight or rotatable right-angled connector) and the drive pairing."},{"question":"What is SH32051P11F2000's listed phase on this component line?","answer":"SH32051P11F2000 is a three-phase servo motor, with speed and torque figures published across 115 V single-phase, 230 V single-phase, 400 V three-phase and 480 V three-phase operating points. The 400 V three-point is the natural pairing for a typical industrial drive bus, and at that point the motor delivers 5500 W continuous."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}