{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P12A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P12A1000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P12A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P12A1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, SH32051P12A1000, 5.5 kW nominal at 400 V three-phase, 3000 rpm, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 12.6 in frame length.","salesMarkdown":"## Speed-torque envelope depends on your supply voltage The SH32051P12A1000 delivers a different nominal torque and speed depending on whether the machine is wired for single-phase 115 V, single-phase 230 V, or three-phase 400/480 V. At 400 V three-phase, nominal speed is 3000 rpm with 154.9 lbf·in (17.5 N·m) of torque; on 115 V single-phase, speed drops to 750 rpm at 282.3 lbf·in (31.9 N·m). The buyer must match the load torque at the operating speed, not just the peak number. This is the thermal limit under continuous duty; the drive sizing must respect the supply configuration. ## Peak-to-continuous torque ratio for transient overloads Peak stall torque is 973.6 lbf·in (110 N·m) across the 115–480 V three-phase range, while continuous stall torque is 326.6 lbf·in (36.9 N·m). That is roughly a 3:1 peak-to-continuous ratio, telling the motion designer how much transient overload the motor can handle before the drive trips on I²t protection. The absolute multiturn SinCos Hiperface encoder provides high-resolution position feedback for precise velocity and position loops. Confirm the drive's encoder interface supports Hiperface protocol — not all servo drives accept this feedback type natively. ## IP rating and connector options for installation The motor carries IP54 at the shaft bushing without a shaft seal ring, and IP65 on the motor body and with the shaft seal ring installed, per IEC 60034-5. A commissioning engineer needs to know which variant is on the line before bolting it into a washdown zone — the shaft bushing seal is the wet-end barrier. Two electrical connection options are listed: a rotatable right-angled connector and a straight connector. The panel builder should pick the one that clears the cable duct or machine frame; the connector orientation affects the bend radius of the power and feedback cables. Mounting uses an international standard flange with an 8.07 in (205 mm) flange size and a 7.09 in (180 mm) centring collar diameter. The shaft is 1.5 in (38 mm) diameter with a parallel key, 3.1 in (80 mm) shaft length. ## Active production — sourcing for BOM freeze or MRO The motor is part of the SH3 series with sizing reference SH32051P.","metaTitle":"Schneider SH32051P12A1000 Servo Motor, 5.5 kW, 3000 rpm","metaDescription":"Schneider SH32051P12A1000 SH3 servo motor, 5.5 kW at 400 V three-phase, 3000 rpm, absolute multiturn Hiperface encoder, IP54/IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P12A1000","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Multiturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,535.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH32051P12A1000/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH32051P12A1000?","answer":"Pricing and availability are confirmed at quote time against your BOM quantity."},{"question":"What supply voltages does this motor run on?","answer":"The SH32051P12A1000 runs on single-phase 115 V, single-phase 230 V, three-phase 400 V, or three-phase 480 V. Nominal speed and torque vary by supply: 3000 rpm at 400 V three-phase, 750 rpm at 115 V single-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P12A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P12A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}