{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P12A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32051P12A2200 three-phase synchronous servo motor, 5500 W continuous power at 400 V three-phase, 3000 rpm nominal speed, 17.5 N.m nominal torque, IP65/IP67 protection, absolute multiturn SinCos Hiperface encoder, international standard flange 205 mm.","salesMarkdown":"## Motor ratings that govern the drive match The SH32051P12A2200 is a three-phase synchronous servo motor delivering 5500 W continuous power at 400 V three-phase input, with a nominal speed of 3000 rpm and nominal torque of 17.5 N.m under the same supply condition. Peak stall torque reaches 110 N.m across the 115...480 V three-phase range, while continuous stall torque is rated at 36.9 N.m — the margin between these figures defines the acceleration headroom for high-dynamic positioning moves. Maximum continuous current is 87.2 A, matching the 3-second peak current rating; the drive must be sized to supply this peak without entering current-limit foldback during acceleration transients. ## Encoder and feedback — absolute position without homing Fitted with an absolute multiturn SinCos Hiperface encoder, this motor reports shaft position over multiple revolutions without requiring a homing sequence on power-up — a direct time saving on multi-axis machines where each axis would otherwise need to find its reference mark. The Hiperface protocol carries both position and temperature data over a single cable pair, reducing the feedback cable count compared to incremental encoder systems that need separate limit-switch wiring. ## Environmental sealing and cooling — no fan, no filter Motor body and shaft bushing are IP65 per IEC 60034-5, with the housing rated IP67 — the motor withstands washdown and airborne particulates without an external shroud, suitable for food-processing or machining-centre coolant exposure. Cooling is by natural convection only; there is no integral fan, so the motor relies on the machine structure or ambient airflow for heat rejection. The thermal limit is set by the copper winding temperature of 130 °C, with stator resistance of 0.3 Ohm and inductance of 2.97 mH defining the I²R loss profile. ## Mechanical interface — flange, shaft, and connector Mounting uses an international standard flange with a 205 mm flange size and 180 mm centring collar diameter, secured through 14 mm mounting holes — a common fit for frame-size equivalent servo motors in European machine-tool practice. The shaft is 38 mm diameter with a 10 mm parallel keyway, 80 mm shaft length, and 4 mm centring collar depth — the keyed interface transmits the 31.9 N.m peak torque without slipping under reversal. Electrical connection is via a rotatable right-angled connector, allowing the cable exit to be oriented in four positions around the motor housing — useful when the motor is mounted in a tight enclosure corner where a straight connector would foul the panel wall.","metaTitle":"SH32051P12A2200 Servo Motor, 5500 W, 3000 rpm, IP65","metaDescription":"SH32051P12A2200 three-phase synchronous servo motor, 5500 W at 400 V, 3000 rpm, 17.5 N.m nominal torque, IP65/IP67, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P12A2200","Length":"12.6 in (321 mm)","Inertia":"0.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"71.4 kg.cm²","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5,581.35 – $6,945.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32051P12A2200/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the nominal torque of SH32051P12A2200 at 400 V three-phase?","answer":"At 400 V three-phase input, the nominal torque is 17.5 N.m (154.9 lbf.in), with a nominal speed of 3000 rpm and continuous power output of 5500 W."},{"question":"What IP rating does SH32051P12A2200 carry?","answer":"The motor body and shaft bushing are IP65, and the housing is IP67, all conforming to IEC 60034-5. This means the motor is protected against dust ingress and low-pressure water jets (IP65), with the housing additionally protected against temporary immersion (IP67)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}