{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P12F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P12F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32051P12F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P12F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32051P12F2000 three-phase servo motor, 80 N.m holding torque, 5500 W, 205 mm flange, IP65, absolute multiturn SinCos Hiperface encoder.","salesMarkdown":"## Active servo motor for high-torque axis work The Schneider Electric SH32051P12F2000 sits in the SH3 series as a three-phase servo with an 80 N.m holding torque and a 205 mm international-standard flange — sized for the kind of axis where a conveyor, indexing table, or filling head needs serious continuous torque without the bulk of a gearbox. Lifecycle reads current on the record, so this is a production-line part, not a leftover stock SKU — for the storeroom it behaves like a fast mover that justifies a min/max slot rather than a one-off purchase. ## 5500 W continuous at 400 V three-phase Continuous power lands at 5500 W at 400 V three-phase, scaling to 5200 W at 480 V three-phase, 4240 W at 230 V single-phase, and 2510 W at 115 V single-phase — so the drive sizing depends entirely on which mains rail the cabinet is fed from, not on the motor itself. ## 80 N.m holding, 110 N.m peak, 31.9 N.m nominal Holding torque is 80 N.m with a peak stall of 110 N.m available from 115 V to 480 V — the peak figure is what lets the drive survive the inertial shock of a sudden direction reversal without stalling into the current limit. Continuous stall torque is 36.9 N.m across the voltage range; nominal torque drops with bus voltage (31.9 N.m at 115 V single-phase, 27 N.m at 230 V single-phase, 17.5 N.m at 400 V three-phase, 13.8 N.m at 480 V three-phase) because the higher-speed field weakens the torque-per-amp envelope, so sizing the gearbox ratio around nominal is safer than around holding torque. ## IP65 on the body, IP54 at the shaft bushing IP65 on the motor housing and shaft bushing per IEC 60034-5 covers washdown duty — the shaft itself drops to IP54 when no shaft seal ring is fitted, so a food-and-beverage line that splashes the motor needs the seal option called out on the PO. The 38 mm shaft with a parallel key and 10 mm key width is a standard fit for couplings and pinions, and the 205 mm flange with 14 mm mounting holes bolts to any common international-standard gearbox adapter — drop-in for the storeroom spares kit rather than a special. ## Shaft loads and thermal envelope Maximum radial force on the shaft drops with speed — 3730 N at 1000 rpm, 2960 N at 2000 rpm, 2580 N at 3000 rpm — so a belt or pinion mounted off the shaft needs the radial load checked against the operating speed, not just the static rating. Maximum axial force Fa is 740 N, natural convection is the cooling path, and the copper-hot ceiling is 130 °C — meaning the motor relies on its own surface area rather than a fan, and any cabinet that blocks airflow around the body pushes the winding temperature up faster than a force-cooled equivalent.","metaTitle":"SH32051P12F2000 servo motor, 80 N.m, 5500 W, IP65","metaDescription":"SH32051P12F2000 three-phase servo motor, 80 N.m holding torque, 5500 W continuous, IP65, absolute SinCos Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P12F2000","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32051P12F2000/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What phase and what length is SH32051P12F2000?","answer":"It is a three-phase servo motor, 14.6 in (370.5 mm) long on the frame. That length is what the cabinet cutout and the clearance behind the gearbox have to accommodate, independent of the drive selection."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P12F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P12F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}