{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P12F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P12F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32051P12F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P12F2100","rawCanonicalId":null},"summary":{"shortDescription":"SH32051P12F2100 three-phase servo motor, 5.5 kW continuous at 400 V, 80 N.m holding brake, IP65, absolute multiturn SinCos Hiperface encoder, 87.2 A RMS.","salesMarkdown":"## Built for the pit — IP65 and a brake that holds The SH32051P12F2100: This is a three-phase synchronous servo motor from the SH3 series, delivering 5500 W continuous power at 400 V three-phase supply. The IP65 rating covers both the motor body and the shaft bushing per IEC 60034-5 — that means abrasive ore dust and washdown water stay out of the windings and bearings. The integrated holding brake is rated 80 N.m (708 lbf.in) — enough to hold a vertical Z-axis or a crusher-gate position when the drive powers down. No external brake resistor needed for static holding. ## Speed and torque — the voltage-dependent curve Nominal speed shifts with supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The full 5500 W continuous output is only available at 400 V three-phase; at 480 V the power drops to 5200 W. Nominal torque also varies by supply: 31.9 N.m at 115 V single-phase, 27 N.m at 230 V single-phase, 17.5 N.m at 400 V three-phase, and 13.8 N.m at 480 V three-phase. The continuous stall torque is 36.9 N.m across the 115-480 V three-phase range — that's the holding torque for positioning without overshoot when the brake is not engaged. Peak stall torque hits 110 N.m (973.6 lbf.in) on three-phase supply, available for 3 seconds. The torque constant is 1.75 N.m/A at 120 °C copper temperature, and the back EMF constant is 104 V/krpm at 20 °C — factor that into the drive's DC bus voltage margin if you need full speed under load. ## Encoder and feedback — absolute position, no homing The absolute multiturn SinCos Hiperface encoder means the drive knows the rotor position at power-up — no homing cycle required after a power loss or emergency stop. This is a time-saver on multi-axis machines where a home sequence would take minutes. The electrical connection uses a rotatable right-angled connector — you can orient the cable exit to clear the machine frame or cable tray without adding a right-angle adapter. ## Mounting and mechanical interface International standard flange, 205 mm (8.07 in) flange size, with a 38 mm (1.5 in) shaft diameter and a parallel key. The centring collar depth is 4 mm (0.2 in). Mounting hole diameter is 14 mm (0.6 in) — standard metric bolt pattern. Maximum radial force Fr is 3730 N at 1000 rpm, dropping to 2580 N at 3000 rpm. Maximum axial force Fa is 740 N. Stay within these limits to avoid bearing overload — especially on belt-driven loads where radial force is higher.","metaTitle":"SH32051P12F2100 servo motor, 5.5 kW, 80 N.m brake, IP65","metaDescription":"SH32051P12F2100 three-phase servo motor, 5.5 kW at 400 V, 80 N.m holding brake, IP65, absolute Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P12F2100","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$5,744.88 – $7,165.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32051P12F2100/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What compliance documentation does this motor carry?","answer":"The IP65 rating is certified per IEC 60034-5 for both the motor body and the shaft bushing. No RoHS, REACH, UL, or IEC specific certification numbers are listed in the available spec data — confirm with the manufacturer for site-specific compliance documentation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P12F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P12F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}