{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32051P12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32051P12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32051P12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32051P12F2200","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series servo motor, SH32051P12F2200, 5.5 kW continuous at 400 V three-phase, 3000 rpm, IP65/IP67, holding brake, absolute multiturn SinCos Hiperface encoder, 38 mm shaft with parallel key.","salesMarkdown":"## Speed-torque map across supply voltages The SH32051P12F2200: This SH3 series servo motor delivers 5500 W continuous power at 400 V three-phase, but the nominal torque drops from 31.9 N·m at 115 V single-phase to 13.8 N·m at 480 V three-phase — the voltage determines the torque ceiling, not the speed. At 400 V three-phase the motor spins 3000 rpm; at 480 V it reaches 3600 rpm, so the drive's DC bus voltage directly sets the speed range. Peak stall torque holds at 110 N·m across the 115...480 V three-phase range, but the 87.2 A peak current (3 s) must be within the servo drive's peak current rating — the torque constant of 1.75 N·m/A at 120 °C gives the current-loop gain target. ## Holding brake and mechanical integration The 80 N·m holding brake locks the shaft when power is removed — critical for vertical-axis loads where the axis must not drift on power loss. The 38 mm shaft with parallel key and 10 mm key width matches standard coupling bores; the 205 mm flange with 14 mm mounting holes and 4 mm centring collar depth bolts to a standard international flange pattern. Radial force limits drop from 3730 N at 1000 rpm to 2580 N at 3000 rpm — belt-driven loads must respect this derating to avoid bearing overload. Maximum axial force is 740 N, so the motor should not be used as a thrust bearing for leadscrew preload. ## Environmental sealing and encoder feedback IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5 — this motor survives washdown in food processing or outdoor conveyor applications. The rotatable right-angled connector lets the cable exit in any of four directions, simplifying routing in tight cabinets. The absolute multiturn SinCos Hiperface encoder eliminates the need for a home cycle on power-up — the drive knows the shaft position immediately. The 104 V/krpm back EMF constant at 20 °C means the drive's DC bus must be at least 312 V to reach 3000 rpm without field weakening. ## Lifecycle and procurement posture This is a critical-spare candidate for any line running SH3-series axes; one in the cabinet before it fails keeps the line running.","metaTitle":"SH32051P12F2200 servo motor, 5.5 kW, 3000 rpm, IP65","metaDescription":"SH32051P12F2200 servo motor, 5.5 kW continuous at 400 V three-phase, 3000 rpm, IP65/IP67, with holding brake and Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32051P12F2200","Length":"14.6 in (370.5 mm)","Inertia":"16.0 kg.cm² of brake 71.4 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 1 stack, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase","Rotor inertia":"87.4 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"282.3 lbf.in (31.9 N.m) 115 V single phase 239.0 lbf.in (27 N.m) 230 V single phase 154.9 lbf.in (17.5 N.m) 400 V three phase 122.1 lbf.in (13.8 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"1.75 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"5500 W","Mounting Support":"International standard flange","Sizing reference":"SH32051P","Back emf constant":"104 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"973.6 lbf.in (110 N.m) 115...480 V three phase","Stator inductance":"2.97 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"87.2 A","Nominal output power":"2510 W 115 V single phase 4240 W 230 V single phase 5500 W 400 V three phase 5200 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"87.2 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"326.6 lbf.in (36.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"3730 N 1000 rpm 2960 N 2000 rpm 2580 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"21 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11,290.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32051P12F2200/sh3-servomotor-205mm-1-stack-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH32051P12F2200?","answer":"Submit an RFQ through this listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32051P12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32051P12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}