{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, sizing reference SH32052P, 220 N·m peak stall torque, 7980 W at 400 V three-phase, IP65 shaft bushing, 38 mm smooth shaft.","salesMarkdown":"## Where this motor lives on the machine The SH32052P01A1200 is an SH3-series servo motor with sizing reference SH32052P, built for direct mounting on an international-standard flange with a 205 mm motor flange and 180 mm centring collar. In a pulp-and-paper winder, a packaging indexing table, or a press feed — anywhere a gear-head is the wrong answer — this is the class of motor a sizing engineer drops in when the load cycles from hold to high torque several times per minute. ## Reading the torque/power envelope against the supply Nominal torque scales inversely with the DC bus the drive is fed from: 61.6 N·m at 115 V single phase drops to 28.4 N·m at 480 V three phase, while nominal output power peaks at 7980 W at 400 V three phase. Peak stall torque is 220 N·m across the 115…480 V range, so the headroom for step-and-hold moves or short-cycle accelerations is constant — what changes between supplies is the continuous operating point, not the burst ceiling. Continuous stall torque of 64.9 N·m at 25.7 A and copper-hot limit of 130 °C are the two figures to derate against the application's duty cycle; at 400 V three phase the nominal 38.1 N·m sits well under the stall ceiling, leaving margin for short overload events. ## Drive sizing from the motor constants Maximum Irms and 3-second peak current both sit at 96.8 A, so the drive sizing must clear that on the peak axis — a continuous-rated servo amplifier cut to nominal torque will trip on the first accel ramp. Back-EMF constant of 161 V/krpm at 20 °C means the regenerated bus voltage rises with speed; at 2000 rpm this is already roughly 322 V back-EMF, so a 400 V-class drive with adequate brake chopper headroom is the realistic match for the 2000 rpm at 400 V three-phase point. Stator resistance of 0.3 Ω and inductance of 2.95 mH, paired with torque constant 2.52 N·m/A at 120 °C, give the current-loop tuning engineer the per-phase impedance needed to set the drive's Kp/Ki for the 5-pole rotor. ## Mechanical integration and shaft-side loads The 38 mm smooth shaft is 80 mm long and accepts standard shrink-fit couplings or mounted pinions; peak axial load is 740 N, while radial load rises with speed — 2910 N at 3000 rpm is the published lower bound. Mounting holes are 14 mm, centring collar depth is 4 mm — the standard international flange pattern lets the motor bolt up to any common machine-side adapter or gear reducer housing. ## Feedback, sealing, and thermal envelope Feedback is an absolute single-turn SinCos Hiperface encoder terminated in a straight connector — pair this motor with a drive that accepts the Hiperface protocol rather than a resolver or incremental input. Ingress protection is rated IP65 at the motor body and shaft bushing, IP67 at the housing, per IEC 60034-5 — coolant splash and outdoor mounting are within scope, but full submergence is not. Cooling is natural convection with no fan; the 130 °C copper-hot winding limit means the motor relies on its mounting flange and ambient airflow, so a stalled shaft in a still enclosure will thermally fault before it mechanically stalls.","metaTitle":"Schneider SH32052P01A1200 Servo Motor, 220 N·m, 8 kW, IP65","metaDescription":"Schneider SH32052P01A1200 SH3 servo motor, 61.6 N·m nominal / 220 N·m peak, 7980 W at 400 V three-phase, IP65 shaft bushing, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P01A1200","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/nl/en/product/SH32052P01A1200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"Where can I buy SH32052P01A1200 and how do I get a price?","answer":"No factory-direct channel is offered from this desk."},{"question":"What are the SH32052P01A1200's key torque and power ratings?","answer":"Nominal torque is 61.6 N·m at 115 V single phase and 28.4 N·m at 480 V three phase; nominal output power peaks at 7980 W at 400 V three phase. Peak stall torque is 220 N·m across the 115…480 V window."},{"question":"What phase is the SH32052P01A1200 listed as and how long is the body?","answer":"The motor is listed as three phase with a body length of 15.9 in (405 mm) per the recorded spec."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}