{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P01F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P01F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P01F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P01F1000","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P01F1000 three-phase servo motor, SH3 series, 7.9 kW continuous power, 2000 rpm nominal at 400 V three-phase, 61.6 Nm nominal torque, absolute single-turn SinCos Hiperface encoder, with holding brake, smooth shaft, IP54/IP65, natural convection cooling.","salesMarkdown":"## Speed-torque map by supply voltage The SH32052P01F1000: This motor delivers different nominal speeds depending on the supply: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase. The torque available also shifts — 61.6 Nm at 115 V single phase drops to 28.4 Nm at 480 V three phase. For a 400 V three-phase line, expect 38.1 Nm nominal at 2000 rpm. Peak stall torque reaches 220 Nm across the 115–480 V three-phase range, so the motor can handle short-duration overloads well above the nominal rating. Continuous stall torque is 64.9 Nm under the same supply conditions. ## Encoder and feedback — absolute single-turn Hiperface Fitted with an absolute single-turn SinCos Hiperface encoder — no need for a homing sequence on power-up; the position is known immediately. The rotatable right-angle connector and straight connector options give flexibility in cable routing inside the cabinet. ## IP rating and cooling — natural convection IP54 at the shaft bushing without the shaft seal ring, IP65 for the motor body and with the shaft bushing seal ring fitted — both per IEC 60034-5. No forced cooling; natural convection only, so the mounting surface and ambient airflow matter for thermal management. Copper hot-spot temperature limit is 130 °C. Smooth shaft, 38 mm diameter, 80 mm shaft length. International standard flange with 205 mm flange size, 180 mm centring collar diameter, 4 mm centring collar depth. Maximum radial force 4200 N at 1000 rpm, derating to 2910 N at 3000 rpm. ## Electrical parameters for drive tuning Stator resistance 0.3 Ω, stator inductance 2.95 mH — these set the electrical time constant and influence the current regulator tuning in the servo drive. Maximum continuous current is 96.8 A RMS; output current 3 s peak is also 96.8 A. Torque constant is 2.52 Nm/A at 120 °C copper temperature. Back EMF constant is 161 V/krpm at 20 °C — use this to calculate the voltage required at a given speed. The motor has 5 poles.","metaTitle":"SH32052P01F1000 servo motor, 7.9 kW, 2000 rpm, 61.6 Nm","metaDescription":"SH32052P01F1000 three-phase servo motor, 7.9 kW continuous, 2000 rpm at 400 V, 61.6 Nm nominal torque, absolute encoder, holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P01F1000","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,690.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32052P01F1000/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What supply voltages and speeds does SH32052P01F1000 support?","answer":"Three-phase input, with nominal speeds of 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase. Torque output varies with voltage — 61.6 Nm at 115 V down to 28.4 Nm at 480 V."},{"question":"What encoder type is on the SH32052P01F1000?","answer":"Absolute single-turn SinCos Hiperface encoder. No homing required on power-up; position is retained. The motor also includes a holding brake rated at 80 Nm."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P01F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P01F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}