{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P01F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P01F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P01F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P01F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32052P01F1200 servo motor, 80 N.m holding torque, 115-480 V supply, 500-2400 rpm nominal, IP65 shaft bushing, SinCos Hiperface encoder.","salesMarkdown":"## Active production, panel builder intake The SH32052P01F1200: Holding torque is 708.06 lbf.in (80 N.m) with a continuous stall of 574.4 lbf.in (64.9 N.m) across the 115-480 V range and a peak stall of 1947.2 lbf.in (220 N.m) for the three-phase envelope — the figure that sizes the drive is the continuous stall, not the peak. ## Speed-power curves across 115 V to 480 V Nominal speed climbs with the supply rail — 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, 2400 rpm at 480 V three phase — and nominal output power tracks that curve from 3230 W at 115 V up to 7980 W at 400 V three phase before easing to 7140 W at 480 V. Nominal torque follows the same envelope: 545.2 lbf.in (61.6 N.m) at 115 V, 495.6 lbf.in (56 N.m) at 230 V, 337.2 lbf.in (38.1 N.m) at 400 V three phase, 251.4 lbf.in (28.4 N.m) at 480 V three phase — the application choice between 230 V single phase and 400 V three phase is really a torque-versus-speed tradeoff. ## Feedback, sealing, and shaft mechanics The shaft end is a smooth 1.5 in (38 mm) diameter, 3.1 in (80 mm) long with an international standard flange of 8.07 in (205 mm); shaft load limits are 740 N axial and 4200 N radial at 1000 rpm down to 2910 N radial at 3000 rpm — the radial number is the one to budget against when the gearbox or coupling sits outboard. Sealing is split per IEC 60034-5: IP65 on the motor body, IP65 on the shaft bushing, IP67 on the housing — the housing rating handles washdown at the cable entry, but the shaft bushing is the IP65 line that constrains the wet-end duty; a food-and-bev line should budget for an additional shaft seal at the gearbox interface. ## Drive matching from the motor's electrical constants Motor electrical constants for drive commissioning: torque constant 2.52 N.m/A at 248 °F (120 °C), back-EMF constant 161 V/krpm at 68 °F (20 °C), stator resistance 0.3 Ohm and stator inductance 2.95 mH — the torque constant at the hot copper temperature, not at 25 °C, is the figure that maps the drive current loop to the shaft.","metaTitle":"SH32052P01F1200 servo motor, 80 N.m, 500-2400 rpm, IP65","metaDescription":"Schneider Electric SH32052P01F1200 SH3 servo motor, 80 N.m holding torque, 500-2400 rpm nominal, IP65 shaft bushing, SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P01F1200","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/nl/en/product/SH32052P01F1200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is SH32052P01F1200's listed phase?","answer":"Three phase. The motor carries both single-phase 115 V / 230 V and three-phase 400 V / 480 V supply ratings, with nominal speed and output power scaling across that envelope."},{"question":"What is SH32052P01F1200's listed length?","answer":"17.9 in (454.5 mm), on an 8.07 in (205 mm) international standard flange with a 14 mm mounting hole pattern."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P01F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P01F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}