{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P01F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P01F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P01F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P01F2200","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series three-phase servo motor, SH32052P01F2200, 205 mm flange, 7900 W continuous, 80 N·m holding brake, absolute single-turn SinCos Hiperface encoder, IP65/IP67.","salesMarkdown":"## Speed-torque envelope across supply voltages The SH32052P01F2200: This SH3 series motor delivers a nominal speed that depends on the supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. The nominal torque follows the same supply-dependent profile — 61.6 N·m at 115 V single-phase, dropping to 28.4 N·m at 480 V three-phase. That means the torque available at the shaft is highest when the motor is fed from a lower-voltage single-phase source, but the speed ceiling is lower. Peak stall torque is rated at 220 N·m across the 115–480 V three-phase range, and continuous stall torque holds at 64.9 N·m under the same conditions. The continuous power rating is 7900 W, which sets the thermal limit for sustained duty cycles. ## Encoder, brake, and environmental sealing The feedback device is an absolute single-turn SinCos Hiperface encoder, which gives position and speed data over a serial link without needing a home cycle on power-up. The holding brake delivers 80 N·m (708 lbf·in), enough to hold the load stationary when the drive is disabled — verify the load's static torque doesn't exceed this figure before relying on the brake for vertical-axis holding. The motor body and shaft bushing meet IP65 per IEC 60034-5, and the housing is rated IP67. That means the motor withstands hose-directed water and temporary immersion — suitable for washdown environments in food processing or packaging lines. Cooling is by natural convection, so no external fan or coolant circuit is needed; derate the continuous torque if the motor is enclosed in a non-ventilated cabinet. ## Mounting and mechanical interface The motor uses an international standard flange with a 205 mm (8.07 in) flange size and a 180 mm (7.09 in) centring collar diameter. The shaft is smooth, 38 mm (1.5 in) diameter, 80 mm (3.1 in) long. The centring collar depth is 4 mm (0.2 in), and the mounting holes are 14 mm (0.6 in) diameter on a bolt circle matching the flange standard. Maximum radial force at the shaft is 4200 N at 1000 rpm, derating to 2910 N at 3000 rpm. Maximum axial force is 740 N. These limits govern the coupling selection and the overhung load from a belt or gearbox — stay within them to avoid bearing damage. ## Electrical parameters and connection Stator resistance is 0.3 Ω and stator inductance is 2.95 mH. The torque constant is 2.52 N·m/A at 120 °C copper temperature, and the back EMF constant is 161 V/krpm at 20 °C. The maximum RMS current is 96.8 A, with a 3-second peak of the same value. The electrical connection uses a rotatable right-angled connector, which helps route the power and feedback cables in tight panel layouts.","metaTitle":"SH32052P01F2200 servo motor, 7.9 kW, 205 mm flange","metaDescription":"SH32052P01F2200 three-phase servo motor, 7900 W continuous, 80 N·m holding brake, IP65/IP67, absolute SinCos encoder. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P01F2200","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1,745.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32052P01F2200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What supply voltages does SH32052P01F2200 accept?","answer":"The motor runs on 115 V single-phase, 230 V single-phase, 400 V three-phase, or 480 V three-phase. The nominal speed and torque vary with the supply voltage — see the speed-torque envelope section for the specific values at each voltage."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P01F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P01F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}