{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02A1000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02A1000","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series three-phase servo motor, SH32052P02A1000, 7900 W continuous power, 205 mm flange, smooth shaft, absolute multiturn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Voltage-dependent performance — the same motor, different supply The SH32052P02A1000: This SH3 frame servo motor delivers a nominal speed of 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase — the same winding, different line voltage, different operating point. Nominal torque follows the same pattern: 61.6 N.m at 115 V single-phase, dropping to 28.4 N.m at 480 V three-phase, while continuous stall torque holds at 64.9 N.m across the 115...480 V three-phase range — the thermal limit of the frame is constant; the voltage-dependent torque curve is what you design to for the duty cycle. Continuous power is 7900 W, but nominal output power varies from 3230 W (115 V single-phase) to 7980 W (400 V three-phase) — the continuous rating is the frame's thermal ceiling, the nominal rating is the application point for your load profile. ## Encoder and feedback — absolute multitrack SinCos Hiperface Fitted with an absolute multiturn SinCos Hiperface encoder — this gives position feedback without a battery-backed count at power-up, and the SinCos analog track provides high-resolution velocity feedback for the drive's current loop. The encoder type dictates drive compatibility: not all servo drives support Hiperface protocol. Confirm the drive's feedback interface supports SinCos Hiperface absolute multiturn before pairing. ## Mechanical interface — flange, shaft, and sealing Motor flange size is 205 mm (8.07 in) with a 180 mm centring collar and 14 mm mounting holes — an international standard flange pattern that matches common gearbox and machine interfaces without adapter plates. Shaft is 38 mm diameter, 80 mm length, smooth (no keyway) — confirm the coupling or pulley bore matches a 38 mm smooth shaft; a keyed shaft is not available on this variant. IP rating depends on the shaft seal configuration: IP54 at the shaft bushing without a seal ring, IP65 with the shaft seal ring fitted — both conforming to IEC 60034-5. For washdown environments, specify the seal ring; for dry indoor use, IP54 is sufficient. Overall length is 405 mm (15.9 in) — verify clearance in the machine envelope, especially if retrofitting into an existing cavity. ## Electrical parameters and overload capability Stator resistance is 0.3 Ohm and stator inductance is 2.95 mH — these set the electrical time constant and influence the drive's current regulator tuning. The torque constant is 2.52 N.m/A at 120°C copper temperature. Peak stall torque reaches 220 N.m (1947.2 lbf.in) at 96.8 A peak current, while continuous stall torque is 64.9 N.m at 25.7 A — a 3.4:1 peak-to-continuous ratio, typical for servo duty cycles with acceleration and deceleration phases. Back EMF constant is 161 V/krpm at 20°C — this limits the maximum speed the drive can achieve given its DC bus voltage. At 480 V three-phase input, the drive bus is roughly 680 VDC, so the back EMF at 2400 rpm is about 386 V line-to-line, leaving headroom for current regulation.","metaTitle":"SH32052P02A1000 servo motor, 7900 W, 205 mm flange","metaDescription":"SH32052P02A1000 three-phase servo motor, 7900 W continuous, 220 N.m peak torque, absolute multiturn SinCos Hiperface encoder, IP54/IP65, active production","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02A1000","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,555.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32052P02A1000/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH32052P02A1000?","answer":"Submit a request with your target quantity and delivery timeline for a current quote."},{"question":"What is SH32052P02A1000's listed phase?","answer":"Three phase — though the motor also operates on single-phase supplies at reduced speed and torque as shown in the voltage-dependent performance curves."},{"question":"What compliance documentation does this brand provide for SH32052P02A1000?","answer":"The motor carries IP rating certification to IEC 60034-5. Standard compliance documentation (CE, UKCA) is expected for an active-production industrial servo motor from this manufacturer, though specific certificates are confirmed at order."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}