{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider SH3 series servo motor, SH32052P02A1200, three phase, 7980 W continuous, 220 N·m peak stall, Hiperface SinCos absolute multiturn encoder, IP65/IP67, smooth shaft, international standard flange.","salesMarkdown":"## Sizing the SH32052P02A1200 to the drive it lands on Nominal output scales with the DC bus the drive delivers: 3230 W at 115 V single phase climbs to 5860 W at 230 V single phase, peaks at 7980 W on 400 V three phase, and steps back to 7140 W at 480 V three phase — so the same motor frame drops roughly 10 % continuous power when fed from a 480 V rectifier versus a 400 V one, and the integrator needs to confirm the drive's nominal bus voltage before locking the BOM line. Continuous power is listed at 7900 W, and the peak stall torque of 220 N·m is the figure that defines the short-cycle overload budget — paired with the 96.8 A Irms/3-second peak, it tells the drive sizing engineer the peak current the amplifier must source without tripping. ## Mechanical integration: flange, shaft, and shaft loads Mounting is via an international standard flange with a 205 mm motor flange size, a 180 mm centring collar seated 4 mm deep, and four 14 mm mounting holes — the standard footprint mates with NEMA-style and IEC flange adapters without an adapter plate. The shaft is a smooth 38 mm diameter × 80 mm long — a heavy-duty profile sized for direct coupling to gearboxes or large-diameter pulleys without a keyway, and the feedback device is an absolute multiturn SinCos Hiperface encoder feeding back to a Lexium-series drive over the standard Hiperface protocol. Shaft loading is the figure most often missed at the BOM stage: maximum radial force Fr is 4200 N at 1000 rpm, dropping to 3330 N at 2000 rpm and 2910 N at 3000 rpm, while maximum axial force Fa is 740 N — these are the bearing-life limits, not just catalogue numbers, and a belted drive with overhung load needs to be checked against the curve at the actual operating rpm. Sealing per IEC 60034-5 is IP65 on the motor body and IP67 on the housing, with IP65 on the shaft bushing — adequate for washdown-adjacent zones and outdoor cabinets, but not full IP69K, so high-pressure food-grade cleaning duty still calls for an external shroud. ## Thermal and electrical envelope Cooling is natural convection, so the continuous torque derates with mounting attitude and any shrouding of the motor body — the 130 °C copper-hot limit is the thermal ceiling, and the continuous stall current of 25.7 A at 64.9 N·m continuous stall torque is the zero-rpm operating point the drive must respect to keep the winding within that thermal budget. Stator resistance is 0.3 Ohm and inductance 2.95 mH, with a back-EMF constant of 161 V/krpm at 20 °C and a torque constant of 2.52 N·m/A at 120 °C — the back-EMF figure is what determines the safe top speed under field-weakening, since the drive's DC bus ceiling minus back-EMF has to stay above zero across the speed range. Nominal speed steps with supply: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, 2400 rpm at 480 V three phase — and nominal torque tracks the inverse curve, from 61.6 N·m at 115 V down to 28.4 N·m at 480 V, because output power P = T·ω is approximately preserved across the voltage steps. ## Production status and how to put it on the BOM Length is 405 mm for cabinet-fit planning, and the connector is a straight connector on the motor face — the long body is consistent with the SH32052 frame's high-inertia rotor and means the integrator should verify axial clearance against adjacent panels before committing the layout.","metaTitle":"Schneider SH32052P02A1200 servo motor, 7980 W","metaDescription":"Schneider SH3 series servo motor, 61.6 N·m nominal torque at 115 V, up to 7980 W at 400 V three phase. Hiperface SinCos encoder, smooth shaft, IP65/IP67.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02A1200","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/nl/en/product/SH32052P02A1200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is the SH32052P02A1200's phase configuration?","answer":"The motor is rated three phase, and the nominal performance figures confirm three-phase operation at 400 V and 480 V — single-phase ratings on 115 V and 230 V are also listed as supplementary operating points."},{"question":"What is the listed length of the SH32052P02A1200?","answer":"The motor body length is 15.9 in (405 mm), which is the figure to use when laying out the cabinet depth against adjacent drives and cable bend radii."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}