{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, three-phase, 7900 W continuous power, 61.6 N·m nominal torque at 400 V three-phase, 500...2400 rpm, absolute multiturn SinCos Hiperface encoder, smooth shaft.","salesMarkdown":"## What this servo is sized for The Schneider Electric SH32052P02A2000 is the SH3 family servo in a 205 mm flange, 405 mm long, with an absolute multiturn SinCos Hiperface encoder and a smooth 38 mm shaft — so it drops into the standard SH3 mounting footprint rather than a one-off mechanical interface. Natural convection cooling and IP65 on the motor body with IP54 at the shaft bushing put it inside an enclosure on a machine frame, not out in washdown or outdoor exposure. Continuous power is 7900 W; the continuous stall envelope is 64.9 N·m at 25.7 A stall current, with a peak stall ceiling of 220 N·m reached through a 96.8 A 3-second peak output — that headroom is what lets the drive push the motor into accel/decel transients without tripping on the first hard move. ## Performance envelope across the supply rails Nominal speed and torque scale with the bus the drive is wired to: 500 rpm and 61.6 N·m at 115 V single-phase, 1000 rpm and 56 N·m at 230 V single-phase, 2000 rpm and 38.1 N·m at 400 V three-phase, 2400 rpm and 28.4 N·m at 480 V three-phase. The same motor on a 480 V drive delivers the broadest speed range but the lowest continuous torque — pick the rail that matches the load's duty point rather than the headline rpm figure. Continuous output power follows the same curve: 3230 W on 115 V single-phase, 5860 W on 230 V single-phase, 7980 W on 400 V three-phase, 7140 W on 480 V three-phase — the 400 V three-phase point is where this frame delivers its rated 7900 W most efficiently, so most cabinet builders land there unless the site distribution forces a 480 V feed. ## Mechanical integration and shaft loading Maximum radial force Fr on the shaft is 4200 N at 1000 rpm, 3330 N at 2000 rpm, and 2910 N at 3000 rpm; maximum axial force Fa is 740 N. For belt or pinion drives those Fr numbers cap the permissible pulley diameter and belt tension at the operating speed — running at 2000 rpm means the coupling design has to stay inside a 3330 N radial budget or the bearing life shortens. The motor flange follows the international standard flange pattern with 14 mm mounting holes and a 180 mm centring collar — the same SH3 mechanical interface across the frame family, so a cabinet redesign only has to confirm shaft length (80 mm,) and the encoder connector position rather than re-machining the mount. ## Electrical constants for drive sizing Rotor inertia includes no brake contribution; this build is supplied without a holding brake — a vertical-axis application that needs a fail-safe stop has to spec an external brake or move to a braked SH3 variant. Connection is via a straight connector with a rotatable right-angled option — the rotatable head is the cabinet-side detail that decides how the cable gland lands on the drive without fouling the cabinet bend radius. Winding thermal limit is 130 °C copper hot and the frame carries a 5-pole design — those two together set the continuous current ceiling the drive must respect in the motor thermal model, not just the headline stall current.","metaTitle":"Schneider SH32052P02A2000 Servo Motor, 61.6 N·m, 400 V","metaDescription":"Schneider SH32052P02A2000 SH3 servo motor, three-phase, 7900 W continuous, 61.6 N·m nominal torque at 400 V, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02A2000","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32052P02A2000/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is SH32052P02A2000's listed phase?","answer":"The published phase on this MPN is three-phase — the nominal speed and torque entries and the output-power entries all reference three-phase operation at 400 V and 480 V, with the single-phase 115 V and 230 V points provided as lower-power fallback ratings on the same frame."},{"question":"What is the listed length of SH32052P02A2000?","answer":"The frame length is 15.9 in / 405 mm, which is the SH32052P02A sizing reference in the SH3 family — a board redesign needs to clear that length plus the selected connector orientation before the mechanical fit is confirmed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}