{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02A2100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series AC servo motor, SH32052P02A2100, 61.6 N.m nominal torque at 115 V single phase, 7980 W at 400 V three phase, 38 mm smooth shaft, SinCos Hiperface absolute multiturn encoder, IP65, natural convection cooling.","salesMarkdown":"## SH3 frame, 205 mm flange, Hiperface feedback — what the part is The SH32052P02A2100 is a member of the SH3 AC servo family, with an 8.07 in (205 mm) international-standard flange and an 180 mm centring collar that bolts directly into the standard servo mounting footprint. There is no holding brake on this build, which is the configuration you specify when the load cannot free-wheel past the coupling under a power-loss event. ## Voltage-dependent torque and power envelope Nominal torque and output power track the supply the drive is fed, not a single flat figure: at 115 V single phase the motor delivers 545.2 lbf.in (61.6 N.m) at 500 rpm and 3230 W continuous; at 230 V single phase it reaches 495.6 lbf.in (56 N.m) at 1000 rpm and 5860 W; at 400 V three phase it produces 337.2 lbf.in (38.1 N.m) at 2000 rpm and 7980 W; at 480 V three phase the rating is 251.4 lbf.in (28.4 N.m) at 2400 rpm and 7140 W. The 400 V three-phase point is the rated maximum continuous power of 7980 W and the operating point the catalog headline number is taken at — sizing a 400 V bus drive around 7.98 kW mechanical output is correct; sizing a 115 V single-phase drive around the same number overstates the available shaft power by roughly 2.5×. ## Peak torque, continuous stall and current ceiling Continuous stall torque is 574.4 lbf.in (64.9 N.m) at a continuous stall current of 25.7 A, so any application that sits near stall speed for more than a few seconds has to be derated to that floor. Maximum Irms and the 3-second peak output current are both 96.8 A — the drive current limit setpoint and the I²t trip in the controller must be configured against that ceiling rather than the nominal current, otherwise the drive will fault on the first hard acceleration pulse. ## Drive-loop electrical constants The torque constant is 2.52 N.m/A at 248 °F (120 °C) winding temperature, which is the working-point figure — not a 25 °C value — so any closed-loop torque estimate has to use it as published. Back-EMF constant is 161 V/krpm at 68 °F (20 °C); the drive's DC-bus voltage ceiling sets the maximum safe no-load speed through that constant. Stator resistance is 0.3 Ohm and stator inductance is 2.95 mH, which feed the current-loop bandwidth tuning and the short-circuit protection coordination on the drive side. ## Mechanical envelope and shaft load ratings The shaft is 1.5 in (38 mm) diameter with a 3.1 in (80 mm) length, smooth (no keyway) — couplings and pinions have to be clamp-style or shrink-fit, not keyed. Mounting holes are 0.6 in (14 mm) diameter on the standard flange pattern and the centring collar is 7.09 in (180 mm) diameter by 0.2 in (4 mm) deep — the bolt circle and pilot fit the SH3 family footprint without adapter plates.","metaTitle":"SH32052P02A2100 SH3 servo motor, 61.6 N.m, Hiperface, 400 V","metaDescription":"Schneider SH32052P02A2100 SH3 AC servo motor, 61.6 N.m nominal at 115 V, SinCos Hiperface absolute multiturn encoder, IP65. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02A2100","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/be/en/product/SH32052P02A2100/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"Is the SH32052P02A2100 available via RFQ confirmation and what is the lead time?","answer":"Availability is confirmed at quote time for the SH32052P02A2100; the storefront sources it to order against an RFQ rather than carrying a live stock figure. Lead time for the build depends on the quantity and the channel, and is locked in once the RFQ is submitted — no off-the-shelf promise is made on this code."},{"question":"What is the listed phase on the SH32052P02A2100?","answer":"The SH32052P02A2100 is a three-phase motor, although it is also rated to operate from a 115 V or 230 V single-phase supply, which is unusual for the SH3 frame — confirm the drive and the supply configuration the cabinet will feed before sizing the bus."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}