{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P02A2200 three-phase servo motor, 5-pole, 7900 W continuous power, IP65/IP67, absolute multiturn SinCos Hiperface encoder, smooth shaft, natural convection cooling.","salesMarkdown":"The SH32052P02A2200 is a three-phase servo motor from the SH3 series, rated 7900 W continuous power with a 5-pole design. That pole count means it delivers smooth torque at low speeds without the cogging you'd see in a 2-pole motor — important for positioning applications where the load has to hold still at zero speed. Nominal torque varies with the supply voltage: 61.6 N·m at 115 V single-phase, dropping to 28.4 N·m at 480 V three-phase. Peak stall torque hits 220 N·m across the 115–480 V three-phase range, which is the number to check if your cycle includes a short-duration acceleration or deceleration event that needs extra muscle. The absolute multiturn SinCos Hiperface encoder gives you position feedback without needing a homing cycle on power-up — the motor knows where it is as soon as the drive powers the encoder. That saves a few seconds per power cycle on a machine that gets turned off between shifts. ## Speed-torque envelope and drive matching Nominal speed climbs with supply voltage: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, 2400 rpm at 480 V three-phase. If you're running this on a 480 V three-phase line, the motor wants to spin at 2400 rpm — your VFD's max output frequency and bus voltage need to support that. Continuous stall torque is 64.9 N·m across the 115–480 V three-phase range, and continuous stall current is 25.7 A. That's the thermal limit for holding torque at zero speed — the drive's current loop must be tuned to stay within this when the motor is stalled under load. Stator resistance is 0.3 Ω and inductance is 2.95 mH. These are the numbers the drive's auto-tuning routine needs for current-loop gains. If you swap this motor onto a drive that was tuned for a different winding, expect the current ripple to be off until you re-tune. ## Mechanical mounting and environmental sealing The motor mounts on an international standard flange with a 205 mm flange size, 180 mm centring collar, and 14 mm mounting holes. That's a common pattern — it bolts up to standard gearboxes and mounting plates without adapters. IP65 on the motor body and shaft bushing, IP67 on the housing. The difference matters: IP67 means the housing can be submerged briefly, but the shaft bushing is only IP65, so a direct spray at the shaft seal will eventually get in. Fine for washdown zones; not for continuous submersion. Cooling is natural convection — no external fan. That means the motor relies on airflow around the housing to shed heat. If you're mounting it in a confined space or near heat sources, you'll need to check the thermal rise against the 130°C copper hot-spot limit. ## Sourcing — current production, quoted to order Sourced through independent distribution channels. No stock-holding claim; each order is confirmed per the lot.","metaTitle":"SH32052P02A2200 servo motor, 7900 W, 5-pole, IP65","metaDescription":"SH32052P02A2200 three-phase servo motor, 7900 W continuous, 5-pole, IP65/IP67, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02A2200","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,970.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32052P02A2200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is SH32052P02A2200's listed phase and length?","answer":"Three-phase motor with a length of 15.9 inches (405 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}