{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F1000","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P02F1000 three-phase servo motor, 7900 W continuous power, 2000 rpm nominal speed at 400 V, 61.6 Nm nominal torque, absolute multiturn SinCos Hiperface encoder, holding brake, IP54/IP65, smooth shaft, international standard flange.","salesMarkdown":"## Motor specs that matter on the line The SH32052P02F1000: This is a three-phase servo motor from the SH3 series, sized for 7900 W continuous power. The nominal speed is supply-dependent: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase. That means on a standard 400 V three-phase line you get 2000 rpm — match it to the drive's output voltage to hit the target speed without overspeeding. Nominal torque also shifts with voltage: 61.6 Nm at 115 V single phase, 56 Nm at 230 V single phase, 38.1 Nm at 400 V three phase, and 28.4 Nm at 480 V three phase. The continuous stall torque is 64.9 Nm across the 115–480 V three-phase range, so the motor can hold a load at standstill at that torque regardless of supply. Peak stall torque hits 220 Nm — useful for short-duration acceleration or clearing a jam. ## Encoder, brake, and feedback loop Fitted with an absolute multiturn SinCos Hiperface encoder. That's a high-resolution feedback device — the drive gets absolute position at power-up, no homing cycle needed. The SinCos analog track gives fine interpolation for velocity loops. If the machine does synchronized motion or electronic gearing, this encoder saves a reference run on every restart. ## Mounting, shaft, and environmental fit The motor uses an international standard flange with a 205 mm flange size and 180 mm centring collar. The shaft is 38 mm diameter, smooth (no keyway), 80 mm shaft length — that's a direct-couple interface, typically using a clamping hub or shrink disc. The mounting holes are 14 mm diameter on the flange face. IP rating depends on the shaft seal: IP54 at the shaft bushing without the seal ring, IP65 on the motor body, and IP65 at the shaft bushing with the seal ring fitted. That means in a dry cabinet it runs IP65, but if washdown is required, the shaft bushing needs the seal ring to keep water out of the bearing area. Natural convection cooling — no fan, so it relies on the machine frame or ambient airflow for heat rejection. ## Electrical connections and thermal limits Two connection options: a rotatable right-angled connector and a straight connector. That gives flexibility for cable routing in tight cabinets — the right-angled version can be oriented to clear adjacent components. Maximum current is 96.8 A RMS, with the same 96.8 A as the 3-second peak output current. The stator resistance is 0.3 ohm and inductance 2.95 mH, which sets the drive's current-loop tuning parameters. Copper winding temperature is rated to 130 °C hot. The torque constant is 2.52 Nm/A at 120 °C — that's the hot rating, so at room temperature the torque per amp is slightly higher. Back EMF constant is 161 V/krpm at 20 °C, which helps the drive calculate the motor's voltage demand at speed. Maximum axial force on the shaft is 740 N; radial force limits are 4200 N at 1000 rpm, 3330 N at 2000 rpm, and 2910 N at 3000 rpm — stay under these to avoid bearing overload.","metaTitle":"SH32052P02F1000 servo motor, 7900 W, 2000 rpm, 61.6 Nm","metaDescription":"SH32052P02F1000 three-phase servo motor, 7900 W continuous, 2000 rpm at 400 V, 61.6 Nm nominal torque, absolute multiturn Hiperface encoder, holding brake","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F1000","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8,135.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32052P02F1000/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is the nominal speed of SH32052P02F1000 at 400 V three-phase?","answer":"2000 rpm nominal at 400 V three-phase. At 480 V three-phase it runs 2400 rpm, and at single-phase voltages the speed is lower: 500 rpm at 115 V, 1000 rpm at 230 V. Match the drive output voltage to the motor's rated voltage to hit the target speed."},{"question":"What encoder type does SH32052P02F1000 use?","answer":"An absolute multiturn SinCos Hiperface encoder. It provides absolute position on power-up and high-resolution sinusoidal analog signals for velocity control. No homing cycle is needed after a power loss, which simplifies commissioning on multi-axis machines."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}