{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F1100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F1100","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P02F1100 SH3 series servo motor, three-phase, 7.9 kW continuous, 205 mm flange, IP65, absolute multiturn SinCos Hiperface encoder, holding brake, smooth shaft.","salesMarkdown":"## Torque delivery across the voltage range The SH32052P02F1100 delivers 61.6 N·m nominal torque on 115 V single-phase supply, dropping to 28.4 N·m on 480 V three-phase — the voltage domain directly sets the available torque, not just the speed ceiling. Nominal speed climbs from 500 rpm at 115 V single-phase to 2400 rpm at 480 V three-phase, so the same motor body covers both low-speed high-torque and high-speed applications depending on the drive voltage. Peak stall torque reaches 220 N·m across the 115–480 V three-phase range, which means the motor can break loose a stalled load without oversizing the frame. ## Mill-floor integration constraints IP65 protection on both the motor body and shaft bushing per IEC 60034-5 means this motor handles washdown and airborne dust common in steel mill environments — the sealing is at the bushing, not just the housing. Natural convection cooling (no fan) keeps the envelope clean of debris accumulation, but the 130 °C copper hot-spot temperature limits the duty cycle in still-air pockets near furnace zones. Maximum radial force Fr drops from 4200 N at 1000 rpm to 2910 N at 3000 rpm — bearing life on a direct-coupled load follows this derating curve, not the static rating. ## Encoder feedback and brake for tension hold The absolute multiturn SinCos Hiperface encoder eliminates homing cycles on power-up — critical for a rolling mill where the strip position must be known after a drive trip. The motor ships with both straight and rotatable right-angle connector options, allowing cable exit orientation to be adjusted in the panel layout without a separate adapter.","metaTitle":"SH32052P02F1100 servo motor, 7.9 kW, 205 mm flange, IP65","metaDescription":"SH32052P02F1100 servo motor, 7.9 kW continuous, 205 mm flange, IP65, absolute multiturn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F1100","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8,185.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32052P02F1100/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What phase and voltage does SH32052P02F1100 run on?","answer":"Three-phase construction, with nominal speeds of 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}