{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32052P02F1200 AC servo motor, 80 N.m holding torque, three-phase 400 V, 205 mm flange, 38 mm smooth shaft, Hiperface SinCos multiturn encoder, with holding brake.","salesMarkdown":"## SH3 servo, sized for 400 V three-phase duty The SH32052P02F1200: Holding torque is rated at 708.06 lbf.in (80 N.m) with a peak stall of 1947.2 lbf.in (220 N.m) on 115…480 V three-phase — the motor delivers its full continuous torque envelope across the 400 V three-phase operating point the rest of the spec table is anchored to. ## Speed-torque envelope by supply voltage Nominal speed steps with supply: 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, 2400 rpm on 480 V three-phase, and the matching nominal-torque figures fall from 545.2 lbf.in (61.6 N.m) at 115 V down to 251.4 lbf.in (28.4 N.m) at 480 V because the constant-power region pulls the available torque down as speed rises. Nominal output power tracks the same curve: 3230 W at 115 V, 5860 W at 230 V, 7980 W at 400 V, and 7140 W at 480 V — so the 400 V operating point is where the motor delivers its rated 7.9 kW continuous mechanical output. ## Mechanical integration and environmental envelope The shaft is 1.5 in (38 mm) diameter by 3.1 in (80 mm) long with a smooth finish, centred on a 7.09 in (180 mm) collar 0.2 in (4 mm) deep, and the flange carries 0.6 in (14 mm) mounting holes on the international standard pattern — a direct bolt-up to a planetary or right-angle gearbox input. ## Winding, rotor, and brake Peak current capability is 96.8 A Irms (3-second peak output current), the same figure the drive will command during the acceleration phase of a fast point-to-point move — sizing the drive's continuous current rating against the motor's continuous torque and the load's RMS demand is what keeps the motor inside its thermal limit of 266 °F (130 °C) copper hotspot. ## Sourcing posture for the SH32052P02F1200 Lifecycle stage is recorded as current on the part record, and the SH3 platform remains a standard frame size in this vendor's servo line — orders are placed against the BOM quantity, lead time and volume pricing confirmed at RFQ through independent distribution. Overall length is 17.9 in (454.5 mm) end-to-end, which matters when the cabinet layout was drawn around a specific servo footprint — confirm the dimension on the installation drawing before committing to a replacement frame, since the SH32052P sizing reference locks the stack length within the SH3 family.","metaTitle":"SH32052P02F1200 SH3 Servo Motor, 80 N.m, 400 V, IP65","metaDescription":"Schneider SH32052P02F1200 SH3 series AC servo motor, 80 N.m holding torque, three-phase 400 V operation, 205 mm flange, IP65. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F1200","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32052P02F1200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What supply voltage and operating speed should I size the SH32052P02F1200 against?","answer":"The 400 V three-phase operating point delivers 2000 rpm nominal speed at 337.2 lbf.in (38.1 N.m) nominal torque and 7980 W nominal output power, which is the design centre for this frame. Single-phase 115 V and 230 V operation is also supported at reduced speed and power, and 480 V three-phase is the upper end of the operating range."},{"question":"What encoder does the SH32052P02F1200 use, and is the brake included?","answer":"The brake adds 16.0 kg.cm² to the rotor's 145 kg.cm² inertia, so the drive's acceleration profile must include the combined inertia figure."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}