{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32052P02F2000 servo motor, 80 N.m holding torque, 7.9 kW continuous, three-phase, IP65, SinCos Hiperface absolute multiturn encoder.","salesMarkdown":"## SH3 servo, 80 N.m holding torque, three-phase drive class The SH32052P02F2000 is the SH32052P frame in the SH3 series — a 205 mm flange, three-phase servo motor sized for machine builders needing up to 80 N.m of holding torque with a Hiperface absolute multiturn feedback device on board. The frame fits the international standard flange mount and lands in the mid-power class of the SH3 line, which means it pairs naturally with mid-range servo drives driving packaging, converting and machine-tool axes rather than the low-inertia point-of-load applications. ## Torque and power across the supply rails Continuous power peaks at 7.9 kW at the 400 V three-point, while the 115 V single-phase rail caps the motor at roughly 3.23 kW of usable shaft power. ## Feedback, electrical connection, thermal ceiling The motor ships with a straight connector and a rotatable right-angled connector option, so the cable exit can be oriented to clear the cabinet bend radius after mounting. Continuous current ceiling is 96.8 A Irms, and the copper-hot thermal limit is 130 °C, meaning the 7.9 kW continuous figure holds as long as the ambient and the mounting surface stay inside the convection envelope — the cooling is natural-convection only, no integrated fan. ## Ingress, flange fit and panel-side mounting The 205 mm flange with a 180 mm centring collar and 14 mm mounting holes drops into the standard IEC mounting footprint; the centring collar depth of 4 mm gives positive pilot location before the through-bolts take the shear load. Shaft is a smooth 38 mm diameter, 80 mm long — verify the mating coupling bore and the keyway before pulling the BOM line. International standard flange mount plus the rotatable connector orientation means the same frame fits both through-bolt and footless flange cabinets, and the 17.9 in (454.5 mm) overall length gives the integrator a fixed envelope to check against the machine slide before commissioning. ## Sourcing posture Production status on the record carries the current lifecycle marker, so the SH32052P02F2000 is a live catalog line — quoted against the RFQ, with lead time and price confirmed at quote time through independent distribution.","metaTitle":"SH32052P02F2000 servo motor, 80 N.m, IP65, Hiperface","metaDescription":"Schneider SH32052P02F2000 SH3 servo motor, 80 N.m holding torque, 7.9 kW, SinCos Hiperface absolute multiturn encoder. Specs and RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F2000","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32052P02F2000/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the SH32052P02F2000's listed phase on this component line?","answer":"Three phase. The motor's voltage/speed table covers 115 V single-phase, 230 V single-phase, 400 V three-phase and 480 V three-phase operation, with the 400 V three-phase rail delivering the 7.9 kW continuous power ceiling."},{"question":"What is the SH32052P02F2000's listed length?","answer":"17.9 in (454.5 mm) overall body length, on the 205 mm international-standard flange with a 180 mm centring collar. The shaft itself is 80 mm long on a 38 mm smooth shaft end."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}