{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor SH32052P02F2100, 80 N.m holding torque, 96.8 A peak, IP65/IEC 60034-5, three-phase.","salesMarkdown":"## What this motor is and where it sits in the drive system The SH32052P02F2100 is a three-phase AC servo motor in the Schneider Electric SH3 family, sized against the SH32052P platform with an 8.07 in (205 mm) international-standard flange and a 17.9 in (454.5 mm) body length. It is engineered to drop directly onto a matched servo drive, with peak stall torque of 220 N.m, continuous stall torque of 64.9 N.m across 115…480 V three-phase, and 3-second peak output current of 96.8 A — the envelope a sizing engineer reads first when matching the motor to a high-inertia load. ## Torque and power across the supported supply rails The pattern matters: at 480 V the motor runs faster (2400 rpm,) but delivers less continuous torque per amp, while at 400 V it sits at 2000 rpm with 38.1 N.m — the voltage selection changes both the speed ceiling and the working torque on the curve. Continuous power is 7900 W, with nominal output power ranging from 3230 W at 115 V single-phase to 7980 W at 400 V three-phase and 7140 W at 480 V three-phase. The 400 V rail is the sweet spot of the envelope — highest continuous output power with the strongest nominal torque per rpm of the supported rails. The torque constant is 2.52 N.m/A at 248 °F (120 °C) and the back-EMF constant is 161 V/krpm at 68 °F (20 °C) — the two figures an integrator uses to back-calculate the drive's current command and to size the DC-bus regulator against the motor's generated EMF under decel. ## Mechanical envelope: shaft, flange and shaft loading The shaft is a 1.5 in (38 mm) diameter smooth shaft, 3.1 in (80 mm) long, centring on a 7.09 in (180 mm) collar at 0.2 in (4 mm) depth, with four 0.6 in (14 mm) mounting holes. That is the standard large-flange SH3 bolt pattern — a direct mechanical drop-in on machines already tooled for the SH32052 family. Above 3000 rpm the radial limit keeps dropping — coupling geometry has to be sized against the operating speed, not the stall torque. ## Thermal, sealing and electrical connection The motor is sealed to IP65 on both the body and the shaft bushing, conforming to IEC 60034-5 — splash- and dust-tight for washdown-adjacent cells and outdoor cabinets, but not rated for high-pressure jet or prolonged submersion. The copper-hot-spot limit is 266 °F (130 °C), which sets the thermal ceiling the drive's I²T model has to respect under sustained load. Stator resistance is 0.3 Ohm and stator inductance is 2.95 mH — the L/R ratio the drive's current controller uses to set the switching-loop bandwidth. Connection options are a straight connector or a rotatable right-angled connector, which lets the cable exit be set after the motor is bolted in place where cabinet routing demands it. ## Procurement posture and what the BOM line should expect The same part, different passport: parallel import from a Schneider authorised region is genuine new stock, but the manufacturer warranty follows the region of sale rather than the region of installation, so warranty geography is a real procurement decision rather than a formality. The sizing reference SH32052P is what the ordering system keys against when the same mechanical frame is requested with a different encoder or brake option.","metaTitle":"SH32052P02F2100 Servo Motor, 80 N.m, 5000 rpm, IP65","metaDescription":"Schneider SH32052P02F2100 SH3 servo motor, 80 N.m holding torque, 3230–7980 W output, IP65/IEC 60034-5. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F2100","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32052P02F2100/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the phase rating of SH32052P02F2100?","answer":"Listed as three-phase; the motor is also characterised on 115 V and 230 V single-phase rails for nominal torque and output power, so the drive configuration — not the motor itself — selects between single- and three-phase supply."},{"question":"What is the listed length of SH32052P02F2100?","answer":"Body length is 17.9 in (454.5 mm), on an 8.07 in (205 mm) international-standard flange. Shaft length is 3.1 in (80 mm) on a 1.5 in (38 mm) diameter smooth shaft."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}