{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series three-phase servo motor, 80 N.m holding torque, 7900 W continuous power, 38 mm smooth shaft, Hiperface absolute multiturn encoder, IP65/IP67, international standard flange mount.","salesMarkdown":"## What the SH32052P02F2200 is, in plain terms The SH32052P02F2200 is a three-phase brushless servo motor out of the SH3 family, built around an international standard 205 mm flange mount and a 38 mm smooth shaft that runs 80 mm out of the housing. Sealing is the headline for any motor that lives near a lube route: IP65 on the motor body, IP65 on the shaft bushing, and IP67 on the housing itself, all per IEC 60034-5 — meaning water jets and oil mist don't get past the seals if the connector is mated and the shaft seal is seated. ## Torque, speed, and what 7900 W actually means on the shaft Continuous stall torque is 64.9 N.m across the full 115 to 480 V range, holding torque is 80 N.m with the brake engaged, and peak stall torque reaches 220 N.m for short bursts — so this motor can take a heavy inertial load through accel/decel without losing the loop. Continuous output power scales with that curve, from 3230 W at 115 V up to 7980 W at 400 V three-phase and 7140 W at 480 V three-phase — so the 7900 W figure is the 400 V three-phase rating, and the drive transformer sizing has to match. The current envelope tops out at 96.8 A Irms and 96.8 A as the 3-second peak — same number on both, which tells you the drive pairing should be sized for sustained current near that ceiling rather than a much lower continuous figure. ## Winding constants, shaft loading, and thermal headroom Winding resistance is 0.3 Ohm with 2.95 mH stator inductance, a torque constant of 2.52 N.m/A, and a back-EMF constant of 161 V/krpm at 20 °C — so at 2000 rpm the motor is generating roughly 322 V of back-EMF, which constrains the usable DC bus voltage and therefore the drive selection. Maximum radial load on the shaft is rated 4200 N at 1000 rpm, falling to 3330 N at 2000 rpm and 2910 N at 3000 rpm, with a 740 N maximum axial force — meaning belt drives and pinion mounts need the pulley sized to keep the overhung load inside that envelope, especially at higher speeds. Cooling is natural convection only — no integrated fan — and the winding hot-spot limit is 130 °C, so any enclosure that traps heat around the motor body will eat into continuous torque before the encoder even notices. Five motor poles, 17.9 in (454.5 mm) overall length, and the unit ships one per package; the centring collar is 180 mm diameter with a 4 mm depth, and the mounting holes are 14 mm — standard for the SH3 frame and what you'd expect to bolt up to a gear reducer or a machine base. ## Sourcing posture for the SH32052P02F2200 Independent distribution quotes to order against the RFQ: the motor ships as a single unit per package with full manufacturer traceability, and any compliance documentation the brand provides (CE, IEC 60034-5 conformance for the IP ratings) is furnished with the shipment at the buyer's request.","metaTitle":"Schneider SH32052P02F2200 Servo Motor, 80 N.m, 7900 W","metaDescription":"Schneider SH32052P02F2200 SH3 series three-phase servo motor, 80 N.m holding torque, 7900 W continuous, IP65/IP67, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P02F2200","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 2 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,538.86","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32052P02F2200/sh3-servomotor-205mm-2-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for the SH32052P02F2200?","answer":"Submit an RFQ with the BOM quantity; the part is quoted to order through independent distribution with manufacturer traceability, and the lead time and price-break ladder come back with the quote."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}