{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P11A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P11A1000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P11A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P11A1000","rawCanonicalId":null},"summary":{"shortDescription":"Kollmorgen SH32052P11A1000 SH3 series servo motor, 7900 W continuous power, 500-2400 rpm, three phase, 1.5 in shaft, absolute single-turn SinCos Hiperface encoder, IP54/IP65.","salesMarkdown":"## Speed and torque across voltage rails The SH32052P11A1000: This motor delivers 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase — the voltage rail directly sets the top speed. Nominal torque follows a similar curve: 545.2 lbf.in (61.6 N.m) at 115 V single-phase, dropping to 251.4 lbf.in (28.4 N.m) at 480 V three-phase. Peak stall torque hits 1947.2 lbf.in (220 N.m) across the 115-480 V three-phase range, so the motor can deliver short-duration overloads well above the continuous rating. ## Mounting and mechanical fit Shaft is 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, with a parallel key 0.4 in (10 mm) wide — standard keyway, no special broaching needed. Mounting holes are 0.6 in (14 mm) diameter on the flange — M12 or 1/2-13 bolts fit. ## IP rating and connection options IP65 motor with IP65 shaft bushing per IEC 60034-5; the shaft bushing without seal ring is IP54 — if the application sees washdown, specify the seal ring variant. Electrical connection is via a rotatable right-angled connector or a straight connector — the listing carries both options, so confirm which one ships. ## Feedback and electrical parameters Absolute single-turn SinCos Hiperface encoder — the motor knows its position at power-up without a homing move, saving cycle time on multi-axis machines. Stator resistance is 0.3 Ohm, inductance 2.95 mH — these matter for the drive's current-loop tuning and for estimating I²R losses at the 96.8 A peak current. The sizing reference is SH32052P — this is the base frame; the P11A1000 suffix encodes the encoder type, shaft, and connection variant.","metaTitle":"Kollmorgen SH32052P11A1000 servo motor, 7900 W, 500-2400 rpm","metaDescription":"Kollmorgen SH32052P11A1000 servo motor, 7900 W continuous, 500-2400 rpm, IP54/IP65, absolute encoder. Current production. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P11A1000","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,195.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32052P11A1000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P11A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P11A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}