{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P11A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P11A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P11A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P11A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 servo motor, SH32052P11A1200, 7900 W continuous, three-phase, 205 mm flange, 38.1 N.m nominal torque at 400 V.","salesMarkdown":"## What lands on the line The SH32052P11A1200: Continuous power is 7900 W, with 7140 W nominal output at 480 V and 7980 W at 400 V three-phase — the 400 V tap is the one that delivers the rated continuous output, so the upstream drive sizing should target that supply class rather than the higher-voltage figure. Natural-convection cooling and IP65 motor / IP67 housing sealing per IEC 60034-5 put this motor in cabinet-free and light-washdown zones — fine for a packaging or converting line where the body takes ambient splash but is not hosed down. ## Torque and speed at each voltage tap Continuous stall torque is 64.9 N.m and peak stall torque is 220 N.m across the full 115–480 V range — the 220 N.m peak is roughly 3.4× the continuous stall figure, which is the working envelope the drive must command during acceleration transients. ## Drive-side electrical interface Maximum Irms and 3-second peak output current both land at 96.8 A — the drive sizing must clear that 3-second peak for the worst-case acceleration segment, not just the continuous figure. ## Mechanical fit and shaft interface Body length is 405 mm with an 80 mm shaft, centring collar 180 mm diameter × 4 mm depth, and four 14 mm mounting holes on the flange — the standard IEC interface, so the coupling and gearbox selection follows the usual servo handbook. Shaft end is parallel-keyed with a 10 mm key, no second shaft — a single-keyed output means the gearbox or coupling must match the keyway orientation, not a flat. ## Sourcing posture Sizing reference and family short-name should be cross-checked against the drive stage on the BOM line before commit.","metaTitle":"SH32052P11A1200 Servo Motor, 7980 W, 38.1 N.m","metaDescription":"SH32052P11A1200 three-phase servo motor, 7900 W continuous, 220 N.m peak stall. Sourced to order against the BOM; availability and pricing confirmed at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P11A1200","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ie/en/product/download-pdf/SH32052P11A1200?filename=Schneider+Electric_Lexium-52-Motors_SH32052P11A1200.pdf', 'path_name': '57f7b2731d534cb357515540de6bb3f3.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/57f7b2731d534cb357515540de6bb3f3.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ie/en/product/SH32052P11A1200/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"Is SH32052P11A1200 available via RFQ confirmation and what is the lead time for an order?","answer":"Submit the BOM quantity and voltage tap (400 V or 480 V three-phase) and the drive-side Hiperface requirement; lead time is returned with the quote against the order."},{"question":"What is SH32052P11A1200's listed phase on this component line?","answer":"Three phase."},{"question":"What is SH32052P11A1200's listed length on this component line?","answer":"405 mm (15.9 in) overall length, with an 80 mm shaft projecting from a 205 mm flange. Standard IEC servo envelope."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P11A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P11A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}