{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P11A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P11A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P11A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P11A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider SH3 series servo motor, part SH32052P11A2000, three-phase, 7900 W continuous, 61.6 N.m nominal torque, 205 mm international flange, Hiperface SinCos absolute encoder, IP65 shaft bushing.","salesMarkdown":"## What an existing axis actually gets from this SH3 The SH32052P11A2000 is a Schneider SH3 servo motor in the 205 mm flange size, built on an international standard flange mount with a 14 mm hole pattern, so it drops into the same envelope most retrofit jobs already have on the floor — no need to re-engineer the bracket. It delivers 7900 W continuous and 61.6 N.m nominal at 115 V single phase, scaling through 56 N.m at 230 V single phase, 38.1 N.m at 400 V three phase, and 28.4 N.m at 480 V three phase — meaning the same frame covers a 230 V North American retrofit and a 400 V European line just by selecting the matching drive rail. ## Torque envelope across supply rails Nominal speed shifts with the rail: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase — a single part number that a panel builder can drop onto a 230 V fan line today and re-rate for a 400 V servo line later without a frame change. Continuous stall torque is rated 574.4 lbf.in (64.9 N.m) across the 115 to 480 V envelope, and the motor holds that torque at standstill with natural convection cooling only — no external fan to mount, route, or filter. ## Mechanical and feedback integration The shaft is 38 mm diameter with an 80 mm length and a 10 mm parallel key, taking radial load up to 4200 N at 1000 rpm and axial load up to 740 N — sized for direct-coupled gearboxes and belt drives on retrofit packaging and converting lines. Feedback is an absolute single-turn SinCos Hiperface encoder, the de-facto standard for Schneider Lexium and legacy servo drive platforms — meet it where the existing drive firmware already is rather than introducing a new comms stack. Sealing is IP54 at the shaft bushing without a seal ring and IP65 on the motor body and shaft bushing per IEC 60034-5; the straight connector termination is the default, with a rotatable right-angled connector available for tight cabinet knockouts. ## Drive-side sizing constants Stator resistance of 0.3 Ohm and stator inductance of 2.95 mH define the current-loop bandwidth the drive must close; the torque constant of 2.52 N.m/A at 120 °C winding gives the amp-per-N.m ratio the drive size must accommodate. Back EMF constant is 161 V/krpm at 20 °C, so the DC-bus ceiling determines the practical field-weakening headroom. ## Sourcing posture for a line-down shaft replacement MOQ and lead time for the 405 mm long, naturally cooled frame are project-dependent and not asserted here.","metaTitle":"Schneider SH32052P11A2000 Servo Motor, 7900 W, 61.6 N.m","metaDescription":"Schneider SH3 servo motor, 7900 W continuous, 61.6 N.m nominal at 115 V, three-phase, 205 mm flange, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P11A2000","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, angular, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ca/en/product/download-pdf/SH32052P11A2000?filename=Schneider+Electric_Lexium-52-Motors_SH32052P11A2000.pdf', 'path_name': 'f541ecfae7219cf6a8d3c66ffeb937c1.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/f541ecfae7219cf6a8d3c66ffeb937c1.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ca/en/product/SH32052P11A2000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What does the SH32052P11A2000 deliver at 115 V single phase versus 400 V three phase?","answer":"The same motor frame carries very different operating points depending on the supply rail: 61.6 N.m nominal torque and 3230 W output at 115 V single phase, falling through 56 N.m / 5860 W at 230 V single phase to 38.1 N.m / 7980 W at 400 V three phase and 28.4 N.m / 7140 W at 480 V three phase. Nominal speed tracks the same way — 500 rpm at 115 V up to 2400 rpm at 480 V — so the drive and transformer selection set the real torque envelope, not the frame."},{"question":"How do I size this motor mechanically — what radial and axial load will it take?","answer":"Maximum radial force Fr is 4200 N at 1000 rpm, derating to 3330 N at 2000 rpm and 2910 N at 3000 rpm; maximum axial force Fa is 740 N. The 38 mm shaft with a 10 mm parallel key and 80 mm length handles direct-couple and most belt-drive retrofit arrangements within that envelope, and rotor inertia of 129 kg.cm² sets the accel/decel current demand the drive must supply."},{"question":"Where can I get the SH32052P11A2000 quoted for an RFQ — and what do I need to know before doing so?","answer":"For a retrofit job, the practical facts to pin down before the RFQ lands are the matching drive platform (Hiperface SinCos is the native feedback protocol), the supply rail you will run the line at, the cabinet knockout orientation for the connector, and whether the existing 205 mm mounting holes and 180 mm centring collar will re-anchor without rework."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P11A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P11A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}