{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32052P11F2000 AC servo motor, 80 N.m holding torque, 7900 W continuous power, three-phase, 38 mm shaft, IP65 shaft bushing, Hiperface SinCos encoder.","salesMarkdown":"## SH3 servo at SH32052P sizing The SH32052P11F2000: Holding torque is rated at 708.06 lbf.in (80 N.m) and continuous power at 7900 W — the two figures that decide whether this frame size covers the load without stepping up to a larger servo. Continuous stall torque lands at 574.4 lbf.in (64.9 N.m) and peak stall torque reaches 1947.2 lbf.in (220 N.m) on the 115...480 V three-phase envelope, so the motor can take a 3x overload step on a cycle without losing position. ## Speed, torque and voltage rails Nominal output power tracks that curve the same way: 3230 W (115 V single-phase), 5860 W (230 V single-phase), 7980 W (400 V three-phase), 7140 W (480 V three-phase), with nominal torque correspondingly 61.6 N.m, 56 N.m, 38.1 N.m and 28.4 N.m across the four rails. Maximum current Irms and the 3-second peak output current are both listed at 96.8 A — the drive sizing ceiling matches the motor's own overload envelope, so a correctly-rated drive will not throttle the peak. ## Drive loop: electrical constants Stator resistance is 0.3 Ohm and stator inductance 8.2 mH — the L/R time constant is the figure the drive's current loop bandwidth has to clear for stable torque control, not the motor's nameplate speed alone. Torque constant sits at 2.52 N.m/A referenced to a 248 °F (120 °C) hotspot, with back-EMF constant 161 V/krpm at 68 °F (20 °C) — the drop between cold and hot is the temperature-coefficient budget the drive's torque-estimator typically corrects for. ## Mechanical envelope and shaft loads Mounting is international standard flange with a 205 mm flange size, 17.9 in (454.5 mm) body length, 14 mm mounting holes and a 38 mm shaft — fits the standard frame cut-out at this rating. Shaft end is parallel-key, 10 mm key width, 80 mm shaft length, 4 mm centring collar depth — verify the coupling bore and key seat against the driven element before committing the BOM line. ## Cooling, sealing and connections Cooling is natural convection with no fan — cabinet airflow and a clean heatsink path are part of the duty envelope, not optional. Electrical connection is a straight connector with a rotatable right-angled connector option, on a 5-pole motor — the rotatable variant eases cable dress inside the cabinet, but pin-out and keying follow the drive side, not the motor body.","metaTitle":"SH32052P11F2000 SH3 Servo Motor, 80 N.m, 7900 W","metaDescription":"SH32052P11F2000 SH3-series AC servo motor, 80 N.m holding torque, 7900 W continuous, SinCos Hiperface encoder, IP65 shaft bushing.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"8.2 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32052P11F2000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32052P11F2000/alternatives.json"},"ai":{"faq":[{"question":"What is SH32052P11F2000's listed phase?","answer":"Three phase. The motor is specified as three-phase and is also listed for 115 V single-phase and 230 V single-phase operating points at the low end of the speed range."},{"question":"What is SH32052P11F2000's length on this component line?","answer":"17.9 in (454.5 mm) for the SH32052P11F2000 body. Flange size is 8.07 in (205 mm) on the international standard flange mount."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}