{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12A1000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12A1000","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P12A1000 servo motor, SH3 series, three-phase, 7900 W continuous power, 2400 rpm at 480 V, absolute multiturn SinCos Hiperface encoder, IP65, 405 mm length.","salesMarkdown":"The SH32052P12A1000: This is a three-phase servo motor from the SH3 series, rated for 7900 W continuous power. The nominal speed depends on the supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. That means the same motor covers a wide speed range depending on the drive and line voltage you feed it — useful if you're standardising on one frame size across multiple machine variants. Nominal torque follows the same pattern: 545.2 lbf.in (61.6 N.m) at 115 V single-phase, dropping to 251.4 lbf.in (28.4 N.m) at 480 V three-phase. The peak stall torque is 1947.2 lbf.in (220 N.m) across the 115...480 V three-phase range — that's the short-term overload capability for acceleration or emergency stops. Continuous stall torque is 574.4 lbf.in (64.9 N.m) under the same three-phase supply. The absolute multiturn SinCos Hiperface encoder gives position feedback without a home cycle after power loss — critical for applications like pick-and-place or gantry axes where the machine must know its position immediately on restart. The encoder type also dictates which servo drive models are compatible; most drives with Hiperface support will accept this motor. ## IP65 protection and mounting dimensions The motor carries IP54 on the shaft bushing without the seal ring, and IP65 on the motor body and shaft bushing when the seal ring is fitted. The IP65 rating conforms to IEC 60034-5. Overall length is 15.9 in (405 mm). The shaft diameter is 1.5 in (38 mm) with a parallel key, shaft length 3.1 in (80 mm), key width 0.4 in (10 mm). The motor flange size is 8.07 in (205 mm) with a centring collar diameter of 7.09 in (180 mm) and centring collar depth 0.2 in (4 mm). Mounting holes are 0.6 in (14 mm) diameter on an international standard flange. These dimensions let you check the bolt pattern and shaft coupling fit against your existing machine frame without pulling the old motor first.","metaTitle":"SH32052P12A1000 servo motor, 7900 W, 2400 rpm, three-phase","metaDescription":"SH32052P12A1000 three-phase servo motor, 7900 W continuous, 2400 rpm at 480 V. Absolute Hiperface encoder, IP65. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12A1000","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,640.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32052P12A1000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"Where can I buy SH32052P12A1000 and how do I get a price?","answer":"This motor is sourced through independent distribution. No stock-holding claim — quoted per order."},{"question":"What is the phase configuration of SH32052P12A1000?","answer":"It is a three-phase motor. The nominal speed and torque vary with the supply voltage — see the spec table for values at 115 V single-phase, 230 V single-phase, 400 V three-phase, and 480 V three-phase."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}