{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series servo motor, three-phase, 7900 W continuous, 8.07 in (205 mm) flange, IP65, parallel-key shaft, absolute multiturn SinCos Hiperface encoder, SH32052P12A2000.","salesMarkdown":"## What this motor delivers on the line The SH32052P12A2000 is a Schneider Electric SH3-series three-phase servo motor sized for 7900 W continuous power on a 8.07 in (205 mm) international-standard flange. It runs from a three-phase supply and reaches 2400 rpm nominal at 480 V, with peak stall torque rated at 220 N.m across the 115 to 480 V operating window. On the 400 V three-phase rail the motor delivers 38.1 N.m nominal torque at 7980 W output, while the 230 V single-phase tap drops to 56 N.m at 5860 W — the rating the integrator reads on the nameplate depends entirely on which supply the drive is configured for. ## Continuous and peak torque envelope Continuous stall torque sits at 64.9 N.m from 115 to 480 V, with the 3-second peak output current allowed to reach 96.8 A. That current ceiling and the 220 N.m peak stall figure define the acceleration reserve available to the drive during a step command — sizing the drive's peak-current limit against this number is the first fit check on the BOM. ## Mechanical integration into the machine The shaft is 38 mm diameter with a 10 mm parallel key and an 80 mm shaft length, so coupling selection and key stock must be matched to those dimensions before the BOM closes. The international-standard flange carries the load back to the gearbox or pinion through 14 mm mounting holes on a 180 mm centring collar. ## Environmental rating and cooling posture The motor is sealed to IP65 on the housing and shaft bushing per IEC 60034-5, which is the rating a panel builder needs when the machine sits near coolant splash or outdoor washdown. Cooling is natural convection only, so the motor must be mounted with the housing fins in free air — no ducting or forced-air shroud is implied by the spec. Thermal copper-hot point is 266 °F (130 °C), the figure the drive's I²t model references when the continuous current is approached at low speeds. ## Feedback and electrical connection Electrical termination is a straight connector or a rotatable right-angled connector — the right-angle option is the one to pick when the cabinet routing would otherwise force a tight bend radius on the feedback cable.","metaTitle":"SH32052P12A2000 servo motor, 7900 W, IP65","metaDescription":"Schneider Electric SH3 servo motor SH32052P12A2000, 7900 W continuous, 8.07 in flange, IP65, three-phase. Quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"8.2 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32052P12A2000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32052P12A2000/alternatives.json"},"ai":{"faq":[{"question":"Is the SH32052P12A2000 available via RFQ confirmation and what is the lead time?","answer":"Availability is confirmed at quote time against an RFQ. This storefront does not publish a stock count or a shipping lead time; the order is placed through the BOM-line quantity and the supplier replies with current pricing and dispatch posture."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}