{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12A2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12A2100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12A2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12A2100","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 SH32052P12A2100 AC servo motor, three-phase, 205 mm flange, 7.9 kW continuous, 220 N·m peak stall, Hiperface SinCos absolute multiturn encoder, IP65.","salesMarkdown":"## Speed, torque, and power across the voltage rails The SH32052P12A2100: Continuous power is listed at 7900 W and peak stall torque reaches 1947.2 lbf·in (220 N·m) across the 115 to 480 V envelope — meaning the drive has to be sized for both the 220 N·m transient (machine presses, indexed stops) and the 64.9 N·m continuous stall, not just the headline kW figure. Maximum current (Irms) and 3-second peak output current both sit at 96.8 A, so the drive's current loop has to deliver that ceiling without saturating on the worst acceleration step; torque constant is 2.52 N·m/A at 248 °F (120 °C) winding, the condition under which the constant is specified. ## Mechanical envelope and shaft load Shaft interface is a parallel-key 1.5 in (38 mm) diameter shaft with a 3.1 in (80 mm) length and a 0.4 in (10 mm) key — the motor mounts to a 205 mm international-standard flange with 0.6 in (14 mm) mounting holes and a 7.09 in (180 mm) centring collar, 4 mm deep. Maximum radial force is rated 4200 N at 1000 rpm, 3330 N at 2000 rpm, and 2910 N at 3000 rpm — the load envelope drops as speed rises, so a belt or pinion mounted outboard has to stay within those curves or bearing life goes first; maximum axial force is 740 N. Body length is 15.9 in (405 mm) and the encoder is an absolute multiturn SinCos Hiperface device, which means the drive side has to support Hiperface protocol over the signal cable — pairing it with a non-Hiperface drive leaves the position feedback dead even though the power stage runs. ## Thermal envelope and environmental rating IP65 is held on both the motor body and the shaft bushing per IEC 60034-5, meaning the motor tolerates water jets and dust ingress — it's appropriate for washdown-adjacent or outdoor cabinet duty, not submersion, and the shaft seal is the wet-end barrier that has to be checked at every servicing interval. ## Sourcing posture for this code Electrical connection is offered as either a straight connector or a rotatable right-angled connector — the right-angle option exists for cabinets where the cable has to exit along the shaft axis, and either way the connector family is the same mating set on the drive-side cable.","metaTitle":"SH32052P12A2100 Servo Motor, 7.9 kW, 220 N·m peak","metaDescription":"SH32052P12A2100 SH3 servo motor, 205 mm flange, 7.9 kW continuous at 400 V three-phase, with Hiperface encoder. Sourced and quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12A2100","Length":"15.9 in (405 mm)","Inertia":"0.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"129 kg.cm²","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/us/en/product/download-pdf/SH32052P12A2100?filename=Schneider+Electric_Lexium-52-Motors_SH32052P12A2100.pdf', 'path_name': '8e84eb27072b338edcefc2efcdcdae6f.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/8e84eb27072b338edcefc2efcdcdae6f.pdf', 'status': 1}","sourceUrl":"https://www.se.com/us/en/product/SH32052P12A2100/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"Who supplies SH32052P12A2100 and how is it quoted for volume purchases?","answer":"Independent industrial-automation distribution handles SH32052P12A2100 against an RFQ — no stock count or live price is on the page, and volume pricing and lead time are confirmed at quote time for the BOM quantity."},{"question":"What is SH32052P12A2100's listed phase on this component line?","answer":"The phase is listed as three-phase on the SH32052P12A2100 record, with a sizing reference of SH32052P and a 205 mm international-standard flange — the same motor frame also accepts single-phase 115 V and 230 V supplies for low-speed duty per the nominal-speed entry."},{"question":"What is SH32052P12A2100's listed length on this component line?","answer":"Length is 15.9 in (405 mm) for the SH32052P12A2100, on a 205 mm flange with a 38 mm shaft — the cabinet footprint the panel builder has to budget is set by that length plus the connector overhang."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12A2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12A2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}