{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12F1100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12F1100","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P12F1100 servo motor, SH3 series, three-phase, 7.9 kW continuous power, IP65, absolute multiturn SinCos Hiperface encoder, holding brake, 205 mm flange.","salesMarkdown":"## Motor form factor and mounting constraints The SH32052P12F1100: This SH3-series servo motor uses an international standard flange with a 205 mm bolt circle and four 14 mm mounting holes. The centring collar depth is 4 mm, so the pilot register on the mating machine frame must match that depth to avoid axial misalignment. Overall length is 454.5 mm from the mounting face to the rear of the housing. The shaft is 38 mm diameter with a 10 mm keyway and 80 mm shaft extension — parallel key. That shaft length gives enough engagement for a standard coupling or pulley hub, but check the keyseat depth against your hub bore before committing. Two electrical connection options are listed — a rotatable right-angled connector and a straight connector. The rotatable version helps when cable routing is tight against the machine frame; the straight connector suits through-panel or drag-chain installations where the cable exits axially. ## Speed-torque envelope — what the supply voltage buys you This is a three-phase motor, but the nominal speed and torque depend heavily on the supply you feed it. At 115 V single-phase, nominal speed is 500 rpm with 61.6 Nm torque and 3230 W output. Step up to 230 V single-phase and you get 1000 rpm, 56 Nm, 5860 W. On 400 V three-phase, it delivers 2000 rpm, 38.1 Nm, 7980 W. At 480 V three-phase, 2400 rpm, 28.4 Nm, 7140 W. Peak stall torque is 220 Nm across the 115...480 V three-phase range, with a peak current of 96.8 A. The torque constant is 2.52 Nm/A at 120 °C copper temperature, and the stator resistance is 0.3 Ohm with 2.95 mH inductance. The back EMF constant is 161 V/krpm at 20 °C. These numbers let you calculate the drive voltage headroom needed to reach full speed under load — at 2000 rpm the back EMF is about 322 V, so a 400 V bus has roughly 78 V margin before the drive hits its voltage limit. ## Encoder, brake, and environmental sealing The encoder is an absolute multiturn SinCos Hiperface type — this gives position feedback even after power loss, and the SinCos analog track provides high-resolution velocity feedback for the drive's servo loop. No homing sequence needed on power-up, which saves cycle time in multi-axis pick-and-place or rotary indexing applications. A holding brake is fitted with 80 Nm holding torque. That's enough to hold a vertical load with a 2:1 safety factor against the motor's continuous stall torque of 64.9 Nm. The brake engages when power is removed — it's a spring-set, electrically released type, so the load stays put during an E-stop or power loss. IP65 protection on both the motor body and the shaft bushing per IEC 60034-5 — the motor withstands hose-directed water and dust ingress. The connector O-ring is the wet-end seal, not the housing thread — make sure the mating cordset has a matching IP65 rating. ## Sourcing and lifecycle — active production No stock-holding claim; each order is placed against the manufacturer's production schedule.","metaTitle":"SH32052P12F1100 servo motor, 7.9 kW, 3-phase, IP65","metaDescription":"SH32052P12F1100 servo motor, 7.9 kW continuous, 3-phase, IP65, absolute multiturn SinCos Hiperface encoder, holding brake. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12F1100","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8,270.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32052P12F1100/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What supply voltages and speeds does SH32052P12F1100 support?","answer":"The motor supports multiple supply configurations: at 115 V single phase, nominal speed is 500 rpm; at 230 V single phase, 1000 rpm; at 400 V three phase, 2000 rpm; at 480 V three phase, 2400 rpm. Nominal torque and power vary with each supply — see the speed-torque section for the full breakdown."},{"question":"What IP rating does this motor have?","answer":"IP65 on both the motor body and the shaft bushing, conforming to IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}