{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series three-phase servo motor, SH32052P12F1200, 80 N.m holding torque, 7900 W continuous power, IP65/IP67, Hiperface multiturn Sin/Cos encoder.","salesMarkdown":"## What is the SH32052P12F1200 SH32052P12F1200 is a member of the SH3 servo motor family, sized against the SH32052P reference, intended for three-phase drive operation. Its key working point is a holding torque of 708.06 lbf.in (80 N.m), backed by a continuous stall torque of 574.4 lbf.in (64.9 N.m) and a peak stall torque ceiling of 1947.2 lbf.in (220 N.m) across the 115 to 480 V range. ## Current draw, torque constant, and what the drive must deliver Maximum current Irms is 96.8 A and the 3-second peak output current is 96.8 A as well, so the upstream drive stage must sustain that envelope without saturating during the peak stall interval. Torque constant is 2.52 N.m/A at 248 °F (120 °C) winding temperature — that is the slope the drive uses to convert commanded current into shaft torque, and the back-EMF constant of 161 V/krpm at 68 °F (20 °C) is the inverse relationship that sets the bus voltage headroom at top speed. ## Mechanical envelope, shaft, and the loads the bearings have to absorb Shaft end is a parallel-key 1.5 in (38 mm) diameter, 3.1 in (80 mm) long with a 0.4 in (10 mm) key, and the bearing set is rated for a maximum axial force Fa of 740 N and a maximum radial force Fr that steps from 4200 N at 1000 rpm down to 2910 N at 3000 rpm — drive sizing has to stay inside that envelope at the operating point. ## Encoder, brake, and ingress in a washdown environment Feedback is an absolute multiturn Sin/Cos Hiperface encoder terminated through a straight connector, which is the interface the drive indexes against on first commissioning; the holding brake is integrated into the motor stack. ## Sourcing posture for the SH32052P12F1200 Lifecycle stage is recorded as current, with a single unit per package, so the line is orderable against the BOM rather than pulled from spot stock.","metaTitle":"SH32052P12F1200 Servo Motor, 80 N.m, 7900 W, 3-Phase","metaDescription":"SH32052P12F1200 three-phase servo motor, 80 N.m holding torque, 7900 W continuous, 96.8 A Irms, IP65/IP67, Hiperface encoder. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12F1200","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ca/en/product/download-pdf/SH32052P12F1200?filename=Schneider+Electric_Lexium-52-Motors_SH32052P12F1200.pdf', 'path_name': '255cafd665ae62bc71a66dd822f8af95.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/255cafd665ae62bc71a66dd822f8af95.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ca/en/product/SH32052P12F1200/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What supply voltage does SH32052P12F1200 run on?","answer":"The design center sits at the 400 V three-phase row, where nominal output power peaks at 7980 W."},{"question":"What feedback does the SH32052P12F1200 ship with?","answer":"Feedback is an absolute multiturn Sin/Cos Hiperface encoder terminated through a straight connector — the absolute multi-turn means position survives power cycles, and Hiperface is the protocol the drive indexes on first commissioning."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}