{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12F2000","rawCanonicalId":null},"summary":{"shortDescription":"SH32052P12F2000 three-phase servo motor, 7900 W continuous power, 220 N.m peak stall torque, absolute multiturn SinCos Hiperface encoder, holding brake, IP54/IP65, current production.","salesMarkdown":"## Motor ratings across supply voltages — what the numbers mean for your drive selection The SH32052P12F2000 is a three-phase servo motor from the SH3 series, rated for 7900 W continuous power with a peak stall torque of 220 N.m (1947.2 lbf.in) across 115...480 V three-phase supplies. The nominal torque and speed shift with the input voltage: at 400 V three-phase you get 38.1 N.m at 2000 rpm; at 480 V three-phase it delivers 28.4 N.m at 2400 rpm. This voltage-dependent curve means the same motor frame serves different speed-torque envelopes depending on the drive's DC bus — a single-phase 230 V input yields 56 N.m at 1000 rpm, useful for lower-speed high-torque applications without a gearbox. The continuous stall torque is 64.9 N.m (574.4 lbf.in) across the three-phase range, and the motor carries a holding brake rated at 80 N.m (708.06 lbf.in) — enough to hold a vertical load at standstill without servo current. The brake is engaged when power is removed, so the load stays put during a power loss or emergency stop. ## Encoder feedback and mechanical integration — what fits where The motor ships with an absolute multiturn SinCos Hiperface encoder, giving single-turn and multi-turn position data over a serial link plus analog sine/cosine tracks. This encoder type is common in high-performance servo drives from多家 brands (Lenze, SEW, Kollmorgen) — the Hiperface protocol is an open standard, so the motor mates with drives that support the interface without a separate feedback converter. The straight connector and the rotatable right-angled connector are both included, letting you route the cable out the back or to the side depending on the cabinet layout. The flange is an international standard 205 mm (8.07 in) pattern with a 14 mm mounting hole diameter and a 4 mm centring collar depth. The shaft is 38 mm diameter, 80 mm long, with a parallel key 10 mm wide. The overall length is 454.5 mm (17.9 in). This matches the IEC standard frame size for motors in this power class — it bolts directly to a standard gearbox or machine frame without adapter plates. IP protection is split: the motor body is IP65, the shaft bushing is IP54 without a shaft seal ring, and IP65 with the seal ring fitted. For washdown environments (food processing, pressure washing), specify the shaft seal ring option — the IP65 motor body alone does not seal the shaft exit. The cooling is natural convection, so no external fan or coolant lines are needed; derate the continuous torque if the motor is enclosed in a tight cabinet without airflow. ## Electrical parameters and thermal limits — sizing the drive and cabling The stator resistance is 0.3 Ohm and the inductance is 2.95 mH — these set the electrical time constant and the current ripple at the drive's PWM frequency. The torque constant is 2.52 N.m/A at 120 °C copper temperature, and the back EMF constant is 161 V/krpm at 20 °C. The maximum continuous current (Irms) is 96.8 A, which is also the 3-second peak current rating. This means the drive must supply 96.8 A peak for acceleration and deceleration, and the cable cross-section must handle that current without exceeding the motor's 130 °C copper hot-spot temperature.","metaTitle":"SH32052P12F2000 servo motor, 7.9 kW, 220 N.m peak","metaDescription":"SH32052P12F2000 three-phase servo motor, 7900 W continuous, 220 N.m peak stall torque, absolute multiturn SinCos Hiperface encoder, holding brake, IP54/IP65","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12F2000","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,602.73","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32052P12F2000/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the peak torque and how does it vary with supply voltage?","answer":"The peak stall torque is 220 N.m (1947.2 lbf.in) across a supply range of 115...480 V three-phase. The nominal torque depends on the supply voltage: 61.6 N.m at 115 V single-phase, 56 N.m at 230 V single-phase, 38.1 N.m at 400 V three-phase, and 28.4 N.m at 480 V three-phase. The continuous stall torque is 64.9 N.m across the three-phase range."},{"question":"What compliance documentation does this brand provide for SH32052P12F2000?","answer":"The evidence does not list RoHS, REACH, UL, or IEC compliance certificates for this specific motor. The IP degree of protection is stated as conforming to IEC 60034-5, which is the standard for rotating electrical machines. For specific compliance documentation, request it at RFQ — the manufacturer typically provides a declaration of conformity for CE/UKCA marking on request."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}