{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32052P12F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32052P12F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32052P12F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32052P12F2100","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series three-phase AC servo motor, 7.9 kW continuous, 80 N.m holding torque, 500–2400 rpm, IP65, parallel key shaft.","salesMarkdown":"## What you're actually buying The SH32052P12F2100 is an SH3-series three-phase AC servo motor sized for the high end of the family's continuous-power band: 7900 W continuous power and 80 N.m holding torque, with a 220 N.m peak stall torque ceiling across the 115–480 V range. It comes with an integrated holding brake and an absolute multiturn SinCos Hiperface encoder, terminated through a straight connector — field-replaceable in most cabinet builds, but the encoder protocol is the binding choice: any replacement drive stage on the machine must speak Hiperface on the feedback channel. ## Voltage curve — read this before you size the drive Nominal speed scales with supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase — meaning a single motor carries four distinct speed/power points and the drive must be commissioned to match the actual mains, not the headline figure. Nominal torque follows the same pattern: 61.6 N.m at 115 V, 56 N.m at 230 V, 38.1 N.m at 400 V, and 28.4 N.m at 480 V — peak mechanical power lives at 400 V three-phase (7980 W nominal output), with 480 V delivering more speed but ~25% less torque than the 115 V single-phase point. Continuous stall torque is 64.9 N.m across 115–480 V three-phase, so the thermal floor is set by the copper-hot rating of 266 °F (130 °C) under natural convection cooling — a heatsink or forced-air fan is not in the spec, which means cabinet airflow has to carry the dissipative load. ## Drive-side electrical constants Back-EMF constant is 161 V/krpm at 20 °C and torque constant is 2.52 N.m/A at 120 °C — together they define the current command for any torque setpoint and confirm the motor wants ~32 A rms per 80 N.m of torque at the operating temperature. Stator resistance is 0.3 Ohm and stator inductance is 2.95 mH; maximum rms current is 96.8 A, which is also the 3-second peak output ceiling — current-loop tuning must clamp below that figure to avoid nuisance trips on acceleration ramps. ## Mechanical fit, shaft load, and IP65 Frame is the 205 mm international-standard flange (8.07 in) with 14 mm mounting holes, 17.9 in (454.5 mm) overall length, and a 38 mm shaft with a 10 mm parallel key and 80 mm shaft length — a standard IEC mounting footprint that drops into most machine-builder adapter plates without re-machining. Shaft load limits are derated with speed: maximum radial force Fr is 4200 N at 1000 rpm, dropping to 3330 N at 2000 rpm and 2910 N at 3000 rpm; maximum axial force Fa is 740 N — the radial ceiling governs pulley or pinion mounting, and any direct-coupling choice needs to keep the overhung load below that curve for the worst-case operating speed. Sealing is IP65 on both the motor body and the shaft bushing per IEC 60034-5 — splash-resistant and dust-tight, which is enough for typical washdown-adjacent cabinet exterior mounting but not for direct food-zone exposure where IP67K/IP69K would normally be specified. ## Lifecycle and sourcing Lifecycle is recorded as current on the part record; no official successor or LTB notice is on file for the SH32052P12F2100 variant, so it ships against the active BOM — though any PCN/EOL change in the SH3 family would land here first. The sizing reference SH32052P12F2100 points at the SH32052P frame size, so a swap stays within the same frame — but connector orientation, encoder protocol, and brake option would all need to be matched before a cross-reference is safe.","metaTitle":"SH32052P12F2100 servo motor, 7.9 kW, 80 N.m, IP65","metaDescription":"SH32052P12F2100 three-phase AC servo motor, 80 N.m holding torque, 7900 W continuous, IP65, SinCos Hiperface encoder, available to quote on RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32052P12F2100","Length":"17.9 in (454.5 mm)","Inertia":"16.0 kg.cm² of brake 129.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 2 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"145 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"545.2 lbf.in (61.6 N.m) 115 V single phase 495.6 lbf.in (56 N.m) 230 V single phase 337.2 lbf.in (38.1 N.m) 400 V three phase 251.4 lbf.in (28.4 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.52 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"7900 W","Mounting Support":"International standard flange","Sizing reference":"SH32052P","Back emf constant":"161 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"1947.2 lbf.in (220 N.m) 115...480 V three phase","Stator inductance":"2.95 mH","Stator resistance":"0.3 Ohm","Maximum current Irms":"96.8 A","Nominal output power":"3230 W 115 V single phase 5860 W 230 V single phase 7980 W 400 V three phase 7140 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"96.8 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"574.4 lbf.in (64.9 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4200 N 1000 rpm 3330 N 2000 rpm 2910 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"25.7 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ca/en/product/download-pdf/SH32052P12F2100?filename=Schneider+Electric_Lexium-52-Motors_SH32052P12F2100.pdf', 'path_name': 'a0aa9a9c10a4649764049938c9aeb122.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/a0aa9a9c10a4649764049938c9aeb122.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ca/en/product/SH32052P12F2100/sh3-servomotor-205mm-2-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to SH32052P12F2100 in this family?","answer":"The sizing reference points at the SH32052P frame, so any same-frame swap still requires a match on encoder protocol (SinCos Hiperface), brake option, and connector orientation before it is mechanically and electrically drop-in."},{"question":"What is the SH32052P12F2100's phase and length?","answer":"It is a three-phase AC servo motor with an overall length of 17.9 in (454.5 mm) on the 205 mm international-standard flange."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32052P12F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32052P12F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}